Home Appliances / Washing Machines
ELKO SmartMove Relay 10A
The ELKO SmartMove Relay 10A is a motion sensor designed to detect heat sources and switch various electrical loads. It supports both direct local control and smart home integration via the Wiser system.
Table of contents
About the Product
The ELKO SmartMove Relay 10A, referred to as a motion sensor, is designed to detect moving heat sources such as people. It is capable of switching ohmic, inductive, or capacitive loads for a configurable overtravel time. This device is a versatile solution for automated lighting and energy management in residential environments.
Control Options
The device offers two primary methods of operation. For smart home integration, users can utilize the Wiser Home app, which requires a Wiser Hub to function. Alternatively, the device supports direct local operation, allowing users to control the relay manually. It is also compatible with an unlimited number of mechanical push-buttons, providing flexibility in how the sensor is triggered.
Installation and Safety
Proper installation is critical for the safe operation of the device. The relay must be installed by skilled professionals who possess profound knowledge of electrical installation networks, device connectivity, and local wiring regulations. Failure to adhere to these safety standards can result in serious injury or death. When selecting an installation site, it is important to avoid areas where light or heat sources might cause undesired switching within the sensor's detection range.
Technical Specifications
The relay operates at a nominal voltage of 230 V AC, 50 Hz, with a nominal current of 10 A (cos φ = 0.6). It features a standby power consumption of maximum 0.4 W. The connection terminals are designed for screw-type connections, supporting up to 2 x 2.5 mm² wires. The device is Zigbee 3.0 certified, operating within the 2405–2480 MHz frequency range with a maximum transmitted radio-frequency power of less than 10 mW.
Maintenance and Disposal
The device requires minimal maintenance. For detailed information regarding operation, configuration, and pairing with a Wiser system, users are encouraged to scan the QR code provided in the documentation to access the full online user guide. When the device reaches the end of its service life, it must not be disposed of with household waste. It should be taken to an official collection point for professional recycling to protect human health and the environment.
Manufacturer information
Schneider Electric
Practical help
Common problems
Undesired switching
Ensure the installation site is free from external light and heat sources that interfere with the detection range.
Before use
- Ensure the power supply is 230 V AC, 50 Hz.
- Verify that the load type is compatible (ohmic, inductive, or capacitive).
- Ensure a 16 A circuit breaker is used for protection.
- Confirm that the installation is performed by a qualified professional.
- Check that the wiring follows local safety regulations.
- Ensure the Wiser Hub is available if smart app control is required.
Specs in practice
- Nominal Current
- 10 A (cos φ = 0.6) is the maximum current the relay can handle for the specified load type.
- Ambient Temperature
- Operating range is 5 °C to 25 °C, with occasional tolerance up to 35 °C.
- Communication Protocol
- Zigbee 3.0 certified for reliable wireless smart home connectivity.
Model compatibility
- Compatible with Wiser Home system via Wiser Hub.
- Supports an unlimited number of mechanical push-buttons for extension.
- Zigbee 3.0 certified.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.