User Guide for Schneider Electric Unica Connected Wireless Switch 1-gang/2-gang

Quick guide from the manual

The Unica Connected Wireless Switch is a battery-powered device designed to control Zigbee-enabled devices like lights or shutters via the Wiser Home app. It requires no wiring and can be configured as a 1-gang or 2-gang switch.

Pairing the device with Wiser Hub

1. Open the Wiser Home app and tap the plus icon to add a device.
2. Select 1-gang or 2-gang Connected Wireless Switch.
3. Remove the rocker cover and press the top-right button 3 times.
4. Wait for the LED to blink amber, then turn green, indicating successful pairing.
5. Assign the device to a room in the app and reassemble the rocker.

Configuring the device

You can customize the switch functionality using the Wiser Home app:

• Location: Assign the switch to a specific room in the app.
• Renaming: Change the device name in the Device Details menu.
• Actions: Configure buttons to control specific devices (e.g., light on/off, shutter position).
• Moments: Group multiple actions together (e.g., Good Night scene).

Replacing the battery

1. Remove the rocker using a screwdriver.
2. Press and hold the battery lid while sliding it open.
3. Replace the CR2032 battery with the plus (+) side facing outward.
4. Slide the lid back to close and reattach the rocker.

Resetting the device

To reset to factory defaults (e.g., when changing gang configuration or replacing the Hub):

1. Remove the rocker.
2. Press the button 3 times (short press), then press and hold for over 10 seconds until the LED blinks red.
3. Release the button; the device will restart.

Troubleshooting

• LED blinks red: Battery is low or drained; replace the CR2032 battery.
• Device offline: Ensure it is within range or press any button to wake it up.
• Connection issues: If the device is in Bluetooth mode instead of Zigbee, press the top-right button 3 times, then hold for 20 seconds until the LED blinks red to reboot into the correct mode.

Technical Data

• Battery: CR2032
• Battery life: Up to 5 years
• Communication: Zigbee 3.0
• Operating temperature: -5 °C to 45 °C
• IP rating: IP20