Scosche 142PI100CL 100W Portable Power Inverter

Product Overview

The Scosche 142PI100CL is a 100W mobile power inverter designed to convert 12V vehicle power into 110V AC power. It is equipped with a standard AC outlet and a 5V/2.4A USB port for charging mobile devices. The unit features an LED indicator to display the operational status and power protection modes.

Technical Specifications

• Input: 12-15VDC, 13A
• Output: 110VAC, 60Hz, 100W (AC outlet)
• USB Output: 5VDC, 2.4A

Installation and Operation

Ensure your vehicle's 12V socket is in good working condition before use. Plug the 12VDC power plug directly into the vehicle's 12V socket. The LED indicator will illuminate green to confirm the unit is powered on. This device is intended for use with 12V power outlets only and is not compatible with cigarette lighter sockets.

Safety Precautions

To prevent personal injury and damage to the device, follow these guidelines:

• Do not insert foreign objects into the AC outlet or ventilation openings.
• Keep the inverter away from flammable materials, fumes, or gases.
• Do not expose the unit to moisture or use it outdoors.
• Ensure the device is kept away from children as it is not a toy.
• Do not leave the inverter unattended while in use and always disconnect it when not needed.
• Avoid blocking ventilation openings; do not place the unit in small, enclosed spaces like glove boxes or consoles with poor air circulation.
• Keep the inverter away from heating vents or direct sunlight.

Troubleshooting and Protection

The unit features an automatic power protection mode indicated by a red LED. It will enter this mode under the following conditions:

• Low Input Voltage: Input drops below 10.65V.
• High Input Voltage: Input exceeds 15-16V.
• Thermal Protection: Internal temperature exceeds 212°F (100°C).
• Overload Protection: Consistent load exceeds 150W or USB output current exceeds 4.0A.

The inverter contains no user-serviceable parts; do not attempt to open the casing.