Lighting / Fixtures
User Manual for SEBSON MIRROR_CAB_C120 Mirror Light
Quick guide for the SEBSON MIRROR_CAB_C120 mirror light. Includes installation instructions, wiring diagrams, safety warnings, technical specifications, and maintenance tips.
Table of contents
Important Information
The SEBSON MIRROR_CAB_C120 is a mirror luminaire designed for mounting on cabinets, shelves, or walls. It features an IP44 protection rating, making it suitable for use in damp rooms. Please read all safety instructions carefully before installation.
Installation
Danger: Installation must be performed by a qualified professional in accordance with local electrical regulations. Ensure the power circuit is interrupted before starting work.
- Preparation: Before drilling, ensure there are no gas, water, or electrical pipes at the drilling location.
- Wiring: Connect the wires according to the following scheme:
- L: Live wire (black or brown)
- N: Neutral conductor (blue or grey)
- Mounting: Follow the provided diagram (Fig. 1) to secure the light to the desired surface. Ensure a minimum distance of 50cm between the illuminated area and the lamp.
Technical Specifications
- Operating Voltage: 220-240V AC 50/60Hz
- Power: 15W
- Luminous Flux: 1500lm
- Color Temperature: 4000K
- Protection Rating: IP44
- Protection Class: II
Cleaning and Maintenance
Before cleaning, always disconnect the power supply by switching off the circuit breaker or removing the fuse. Use a slightly moistened cloth for cleaning. Do not use solvent-containing cleaners. Never clean the device under running water and ensure no water penetrates the housing.
Safety Warnings
- The built-in light source cannot be replaced.
- Do not connect a dimmer, as this may damage the product.
- Do not cover the light with heat-insulating materials.
- Modifying the product is prohibited and will void the warranty.
- For indoor use only; not suitable for outdoor use.
Practical help
Common problems
Light does not turn on
Ensure the circuit breaker is on and the wiring (L and N) is correctly connected.
Light flickers or is damaged
Do not use a dimmer switch, as it is not compatible and can damage the LED driver.
Before use
- Ensure the power circuit is turned off at the fuse box.
- Check for hidden gas, water, or electrical pipes before drilling.
- Verify the voltage matches 220-240V AC.
- Ensure the installation area is suitable for IP44 rated equipment.
- Remove all packaging materials.
Images and diagrams
- The installation diagram illustrates the step-by-step process: turning off the power, drilling, wiring the L and N connections, and mounting the fixture.
Model compatibility
- Not compatible with dimmers.
- For indoor use only.
- Not suitable for outdoor use.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.