SHADA 300416 Outdoor Solar LED Floodlight Instructions
Comprehensive user guide for the Shada 300416 8W 1000lm Solar LED Floodlight, covering installation, operation modes, maintenance, and safety guidelines.
Table of contents
Product Overview
The Shada 300416 is an 8W outdoor solar LED floodlight designed to provide efficient, sustainable lighting. This unit features an integrated solar panel and a rechargeable 18650 Li-ion battery, making it an ideal solution for outdoor areas where traditional wiring is impractical. With an IP54 rating, the floodlight is protected against dust and water splashes, ensuring durability in various weather conditions.
Safety and Installation
Before installation, ensure the product is not damaged. Do not attempt to modify or repair the unit yourself, as this may cause electric shock or fire. The device should be installed in a location that receives direct sunlight to ensure optimal battery charging. Use the provided mounting template to drill holes at the correct spacing, insert the wall plugs, and secure the floodlight firmly to the wall. Ensure the installation height is between 1 and 3 meters for the best motion sensor performance.
Operation Modes
The floodlight offers multiple operating modes controlled by the power button. Users can cycle through these settings to customize brightness and sensor behavior:

- Mode 1: 100% brightness for 18 seconds upon motion detection.
- Mode 2: 100% brightness for 18 seconds upon motion detection, with a 40lm dim light mode.
- Mode 3: Constant 40lm light output (sensor disabled).
- Mode 4: Off.
The motion sensor has a detection range of up to 6 meters with a 120-degree field of view.
Maintenance and Care
To maintain optimal performance, keep the solar panel clean and free of debris, dust, or snow. Use a soft, dry, or slightly damp microfiber cloth for cleaning. Do not use abrasive chemicals or detergents, as these can damage the surface of the light. If the light output decreases significantly, check if the solar panel is obstructed or if the battery requires replacement. The battery is a standard 18650 Li-ion type and can be replaced if necessary by opening the battery compartment.
Disposal and Environment
This product contains electronic components and a battery that must not be disposed of with household waste. Please follow local regulations for the recycling of electrical and electronic equipment. By disposing of this product correctly, you help prevent negative impacts on the environment and human health.
Manufacturer information
Shada B.V.
Practical help
Common problems
Ensure the unit is switched on and the solar panel is receiving sufficient sunlight to charge the battery.
Check if the installation height is within the recommended 1-3 meters and ensure the sensor lens is clean.
Before use
- Inspect the product for any transport damage.
- Ensure the solar panel is positioned to receive maximum sunlight.
- Verify the mounting surface is stable and suitable for the weight of the light.
- Check that the battery is correctly inserted in the compartment.
- Test the light modes before final mounting.
Images and diagrams
- The mounting diagram shows the 68mm x 40mm hole spacing required for wall installation.
- The operation diagram illustrates the button sequence to cycle through the four available light modes.
- The battery diagram shows the correct polarity for inserting the 18650 battery.
Model compatibility
- Designed for outdoor use only.
- Requires direct sunlight for optimal battery performance.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.