Music / Guitar Effects
User Manual for TC Electronic Forcefield Compressor
Quick start guide and user manual for the TC Electronic Forcefield Compressor. Includes setup, control explanations, battery replacement, and technical specifications.
Table of contents
Quick guide from the manual
The TC Electronic Forcefield Compressor is a classic compressor/limiter pedal designed for guitarists. This guide covers the essential setup, control functions, and maintenance to get you started.
Controls
- Input/Output jacks: Connect your guitar to the INPUT jack and your amplifier to the OUTPUT jack using 1/4" cables.
- 9 V DC: Connect a standard 9 V power supply (center negative, >100 mA).
- Footswitch: Engages or disengages the effect. The LED lights up when active. The pedal features true bypass when disengaged.
- Sustain: Adjusts the amount of compression applied to the signal.
- Attack: Controls how quickly the effect engages after the signal exceeds the threshold.
- Level: Adjusts the output volume when the effect is engaged.
Battery Replacement
To replace the battery, ensure the pedal is disconnected. Open the battery compartment and replace the 9 V battery. Always replace all batteries in a set at the same time and ensure correct polarity (+ and -). Remove the battery if the product is to be left unused for a long time.
Specifications
- Input Impedance: >350 kΩ
- Output Impedance: 1 kΩ
- Power Input: Standard 9 V DC, center negative, >100 mA
- Current Consumption:
- Dimensions (H x W x D): 58 x 74 x 132 mm
- Weight: 0.5 kg
Safety
Do not install near heat sources such as radiators or stoves. Do not use the apparatus near water. Clean only with a dry cloth. Do not block ventilation openings.
Manufacturer information
TC Electronic
Practical help
Common problems
No sound
Check that the 9V power supply is connected or the battery is fresh. Ensure 1/4 inch cables are securely connected to Input and Output jacks.
Effect not engaging
Check the footswitch and ensure the LED lights up when pressed. If not, check power source.
Before use
- Ensure you have a 9V power supply or a fresh 9V battery.
- Use 1/4 inch TS cables for guitar and amplifier connections.
- Check that the pedal is not placed near water or heat sources.
- Verify that the battery compartment is closed securely.
Specs in practice
- Input Impedance
- >350 kΩ - ensures compatibility with standard guitar pickups.
Model compatibility
- Requires 9V DC power supply (not included) or 9V battery.
- Compatible with standard 1/4 inch instrument cables.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.