Thlevel 12V-24V USB Car Charger Socket User Manual

Quick guide from the manual

This manual provides installation and operating instructions for the Thlevel USB C Car Charger Socket. The device features both PD (Power Delivery) and QC 3.0 (Quick Charge) ports, designed for 12V/24V vehicle systems including boats, motorcycles, trucks, and RVs.

Installation instructions

1. Prepare the mounting hole: Use a hole opener to drill a hole with a diameter of approximately 1.13 inches.
2. Mount the socket: Unscrew the fastening nut from the back of the charger. Insert the charger body into the drilled hole.
3. Secure the socket: Screw the fastening nut back onto the charger from the rear until it is tight.
4. Wiring: Locate the positive (+) and negative (-) markings on the underside of the charger. Connect the positive wire to the positive pole of the battery and the negative wire to the negative pole. Ensure the included 10A fuse is installed in the circuit.

Technical specifications

• Input Voltage: DC 12V-24V
• Output Ports: USB + Type C
• PD Fast Charging Max Output: 36W
• QC 3.0 Fast Charging Max Output: 22.5W
• Output Current: ≤6A
• Materials: ABS

Usage notes

For optimal performance, please note the following:

• Fast Charging: To achieve fast charging speeds, you must use the original charging cable or a cable specifically rated for fast charging.
• Standard Charging: Mobile phones that do not support fast charging protocols will charge at normal speeds.
• Safety: The cable includes a built-in 10A fuse to provide protection against overcharge, overcurrent, overheating, and short circuits.
• Energy Saving: The device is designed with a switch to allow for energy saving and to protect connected devices when not in use.