General / Other Manuals
Parts Diagram for Truper 1900W 7-1/4" Circular Saw
Comprehensive parts breakdown and exploded view guide for the Truper 1900W 7-1/4" Industrial Circular Saw, including a full list of components and service contact information.
Table of contents
Quick guide from the manual
This document serves as the official parts breakdown and exploded view diagram for the Truper 1900W 7-1/4" Industrial Circular Saw (Model: SICI-7-1/4N5, Code: 103740). It is intended for identifying specific components for maintenance, repair, or replacement. For technical support or to purchase spare parts, please contact authorized Truper Service Centers or call 800-018-7873.
Device components and parts list
The manual provides a detailed exploded view of the circular saw, mapping individual parts to their respective codes and descriptions. Key components identified include:
- Motor and Drive System: Motor housing, field assembly, armature, ball bearings (608 and 6001), and gear assembly.
- Blade and Guard System: Retractable guard, inner and outer flanges, and upper guard.
- Adjustment Mechanisms: Depth adjustment knob, angle support, and angle pointer.
- Electrical and Control: Power cable, switch, locking trigger, and carbon brushes.
- Structural Elements: Base plate (shoe), handle, and dust collection duct.
Maintenance and service
All parts listed in the diagram are available through authorized Truper Service Centers. When performing maintenance or repairs, ensure the tool is disconnected from the power source. Refer to the exploded view to correctly identify the specific part number (Clave) required for your repair. Do not attempt to modify the tool or use non-original parts, as this may compromise safety and performance.
Manufacturer information
TRUPER, S.A. DE C.V.
Practical help
Common problems
Need to replace worn carbon brushes
Refer to parts 22.1 and 22.2 in the diagram to identify the correct carbon brush components for replacement.
Damaged power cable
The power cable (part 13) and cable protector (part 12) can be sourced via authorized service centers using the provided codes.
Before use
- Verify all screws and fasteners are tightened before operation.
- Ensure the retractable guard (part 51) moves freely without obstruction.
- Check that the blade is securely fastened using the inner and outer flanges (parts 54 and 56).
- Confirm the depth adjustment knob (part 7) is locked before starting a cut.
Images and diagrams
- The exploded view provides a numerical reference for every screw, seal, and mechanical part.
- Use the 'No.' column to locate the part in the visual diagram.
- Use the 'Clave' column when ordering replacement parts from a service center.
Model compatibility
- This diagram is specific to the Truper Industrial SICI-7-1/4N5 model (Code 103740).
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.