User Manual for Verbatim VAPP109 Power Bank

Quick guide from the manual

The Verbatim VAPP109 is a portable power bank featuring both USB-A (QC 3.0) and Type-C (PD 3.0) ports. It is designed to charge smartphones, tablets, and other compatible devices. Please read all safety instructions before use to prevent damage or injury.

Safety Precautions

• Do not disassemble, modify, or alter the charging device.
• Keep the power pack away from heat sources, direct sunlight, combustible gas, humidity, water, or other liquids.
• Do not drop or subject the device to strong mechanical shock.
• Do not insert objects into the ports.
• Do not operate if the device has been dropped or damaged.
• Charge in a well-ventilated area. Do not charge under pillows, blankets, or on flammable surfaces.
• Do not charge in environments exceeding 40°C (104°F).
• Keep out of reach of children.
• Unplug before maintenance or cleaning.
• Do not short-circuit the power pack.

Package Contents

• 1 x Power Pack
• 1 x USB-A to Type C Cable

Specifications

• Battery type: Li-Polymer
• Operating temperature: 0°C - 40°C
• Cycle time: Above 500 cycles
• Dimensions: 124.7 x 61 x 12.4 mm
• Weight: 188g
• Input (MicroUSB): 5V/2A, 9V/2A (Max 18W)
• Input (Type C PD 3.0): 5V/2.4A, 9V/2A, 12V/1.5A (Max 18W)
• Output (USB-A QC 3.0): 5V/2.4A, 9V/2A, 12V/1.5A (Max 18W)
• Output (Type C PD 3.0): 5V/3A, 9V/2.22A, 12V/1.67A (Max 20W)
• Total Output: Max 20W (Note: When using more than one output concurrently, total maximum output is 15W shared among ports).

Charging the Power Pack

1. Connect the Type C side of the supplied cable to the Type C port on the power pack.
2. Connect the USB-A side of the cable to a computer USB-A port or a USB AC adaptor.
3. The LED lights will display the battery level. When fully charged, all four LED lights will remain on.
4. The LED lights will switch off automatically when the charging cable is unplugged.

Charging Smartphones, Tablets and Other Devices

1. Connect your device to the power pack using your device's regular charging cable.
2. Plug the cable into either the USB-A or Type C port on the power pack.
3. The LED Power Indicator will turn on.
4. The LED lights will switch off automatically when the charging cable is unplugged.

LED Indicators

A flashing white LED indicates the power pack is charging. The position of the lights indicates the overall charge percentage, with each light representing 25%.

• 4 White Lights: Fully Charged
• 3 White Lights: 75% Charge remaining
• 2 White Lights: 50% Charge remaining
• 1 White Light: 25% Charge remaining
• Green LED: Indicates fast charging.

Device Disposal

Please observe local laws when disposing of electronic devices and batteries.