General / Other Manuals
Acroma 1306DWAZ Agen 6 Light Farmhouse LED Chandelier Installation Manual
Quick installation guide for the Acroma 1306DWAZ Agen 6-light farmhouse chandelier. Includes step-by-step assembly, wiring instructions, and safety precautions.
Table of contents
Quick guide from the manual
This document provides installation and assembly instructions for the Acroma 1306DWAZ 6-light chandelier. Before starting, ensure the power is disconnected at the circuit breaker. The installation requires basic tools including a Phillips screwdriver, wire strippers, pliers, safety goggles, and electrical tape. Always consult a qualified electrician if you are unsure about electrical connections.
Safety Information
- Turn off power at the main fuse or circuit breaker before starting.
- Use a voltage tester to ensure wires are not live.
- Ensure hands and feet are dry during installation.
- Use tools with insulated handles.
- Do not modify or alter the fixture.
Assembly Instructions
The assembly process involves preparing the fixture body and mounting it to the ceiling junction box.
- Socket Sleeves: Install the socket sleeves (K) onto the fixture base.
- Side Hanging Rods: Attach the side hanging rods (L) to the wheel and wiring chamber using the chain end loops (G).
- Chain Assembly: Connect the chain (H) and connector ring (I) to the top of the fixture assembly.
- Mounting: Attach the mounting plate (B) to the junction box. Use the provided lanyard to hold the fixture in place while making electrical connections.
- Wiring: Connect the fixture wires to the supply wires using wire connectors (E). Match white to white (or identified), black to plain (or black), and connect the ground wire to the green screw or supply ground wire.
- Final Mounting: Secure the canopy (A) to the mounting plate (B) using the provided hardware.
Technical Specifications
The fixture is designed for 6 x Max 60W Candelabra base bulbs.
Practical help
Common problems
Fixture does not light up after installation
Verify that the circuit breaker is on, the bulbs are properly seated, and all wire connections are secure and correctly matched.
Fixture feels unstable or loose
Ensure the mounting plate is securely fastened to the junction box and the canopy is tightened properly against the ceiling.
Before use
- Turn off power at the circuit breaker.
- Verify all hardware (canopy, mounting plate, wire nuts, etc.) is present.
- Ensure you have a Phillips screwdriver, wire strippers, and pliers.
- Wear safety goggles during installation.
- Check that the junction box is capable of supporting the fixture weight.
Specs in practice
- 6 x Max 60W Candelabra Base
- The fixture supports up to 6 bulbs with a Candelabra (E12) base, each not exceeding 60 watts.
Model compatibility
- Designed for indoor use only.
- Requires a standard electrical junction box for mounting.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.