User Manual for Amazon Basics 100MI Ultrasonic Aromatherapy Essential Oil Aroma Diffuser

Quick guide from the manual

This aroma diffuser is designed for private use in dry indoor areas to add moisture to the air and diffuse essential oils or homemade fragrances. Important: Always use the provided power adapter (24 V, 0.5 A). Do not use pure essential oils or homemade fragrances without water. The device is not a medical respirator or humidifier.

Product Description

The device consists of the following main components:

• A: Opening for mist nozzle
• B: Plastic housing
• C: Mist nozzle
• D: Tank cap
• E: DC power input socket
• F: Power button
• G: Power adapter
• H: Maximum water level
• I: Ultrasonic plate
• J: Water tank
• K: Light/Mode button
• L: Air intake

Operation

Filling the water tank:

1. Disconnect the product from the power supply.
2. Remove the plastic housing (B) and the tank cap (D).
3. Fill the water tank (J) with cool distilled water up to the maximum water level (H). Do not exceed 3.4 fl oz (100 ml).
4. Add a few drops of essential oil or homemade fragrance into the water.
5. Replace the tank cap (D) and plastic housing (B).

Powering on:

• Connect the power adapter (G) to the DC power input socket (E) and plug it into a household outlet.
• Press the power button (F) once to start diffusion. Press again to switch off.

Operation Modes:

• Press the Light/Mode button (K) while the product is operating to cycle through LED colors: red, purple, blue, pink, white, green, and orange.
• No-color diffusion: Press the Light/Mode button (K) again to turn off LED lights while continuing to diffuse.
• Periodic diffusion: Press and hold the Light/Mode button (K) for 2 seconds in any color mode. The product will operate and pause at 30-second intervals.

Cleaning and Maintenance

Cleaning:

• Clean the water tank (J) every 3 days.
• Rinse the tank with 1 tablespoon of citric acid and max 3.4 fl oz (100 ml) of hot water (160 °F / 70 °C).
• Let the solution sit for 5 minutes, then pour it out.
• Wipe the tank with a soft cloth. Clean the ultrasonic plate (I) carefully with a cotton bud.
• Never use corrosive detergents, wire brushes, or abrasive scourers.

Emptying water: Always pour remaining water from the side marked DRAIN SIDE. Do not pour through the mist nozzle opening.

Troubleshooting

• Product does not switch on: Check if the power adapter is connected and the outlet works. Ensure the DC cable is connected and the tank is filled.
• Unpleasant odor: Clean the water tank and replace the water.
• No mist emitted: Check the DC cable connection, ensure the mist nozzle is not obstructed, and refill the water tank.
• Leaking: Ensure the tank cap is properly placed and the water tank is not damaged.

Specifications

• Input ratings: 24 V, 0.5 A
• Water tank capacity: 3.4 fl oz (100 ml)
• Lighting: 4 x LED bulbs
• Dimensions: approx. 3.54 x 5.39 x 3.54 inches (90 x 137 x 90 mm)