User Manual for Baby Einstein Kick to It Neptune Musical Bouncer

Important Safety Information

WARNING: Failure to follow these warnings can result in serious injury or death.

• Fall Hazard: Babies have suffered skull fractures falling from bouncers. NEVER leave the child unattended. Use the bouncer ONLY on the floor. NEVER use on an elevated surface.
• Suffocation Hazard: Babies have suffocated when bouncers tipped over on soft surfaces or were used as sleep products. NEVER use on a bed, sofa, cushion, or other soft surface. This product is not safe for sleep. If the baby falls asleep, move them to a firm, flat sleep surface like a crib or bassinet.
• Usage Limits: STOP using the bouncer when the baby starts trying to sit up or has reached 20 lb (9 kg), whichever comes first.
• Transport: NEVER lift or carry the baby in the bouncer. NEVER lift the bouncer using the toy bar as a handle.

Assembly

Adult assembly is required. Before assembly, ensure all parts are present according to the parts list. Assemble the frame by connecting the base frame tubes and backrest tubes as shown in the assembly steps. Ensure all buckles and hook-and-loop patches on the seat pad are securely fastened.

Battery Installation

The music/vibration unit requires (3) size C/LR14 (1.5V) alkaline batteries (not included). To install:

1. Locate the battery compartment on the power module.
2. Use a screwdriver to open the battery cover.
3. Insert 3 fresh C/LR14 alkaline batteries, ensuring correct polarity as marked in the compartment.
4. Replace the cover and secure it with the screw.

Note: Weak batteries cause erratic operation, including distorted sound, dimming lights, or slow/non-working motorized parts. Replace batteries if any function fails.

Operation

The power module features a 3-position slide switch:

• Parent Activated Setting: Slide the switch to the right. Music and lights play continuously for 20 minutes.
• Baby Activated Setting: Slide the switch to the far-right. Sounds and lights activate when baby motion is detected.
• OFF: Slide the switch to the far-left position.

Vibration: Press the vibration ON/OFF button to toggle vibration. The vibration function automatically turns off after 20 minutes.

Care and Cleaning

• Seat Pad: Remove from frame. Fasten all buckles and hook-and-loop patches. Machine wash with cold water, gentle cycle. No bleach. Tumble dry on low heat.
• Headrest: Fasten all hook-and-loop patches. Machine wash with cold water, gentle cycle. No bleach. Air dry flat.
• Toy Bar and Toys: Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.
• Frame: Wipe the metal frame with a soft, clean cloth and mild soap.