User Manual for BaByliss 2385U Tight Curls Wand
Quick guide for the BaByliss 2385U Tight Curls Wand. Learn how to use the device, adjust heat settings, maintain the appliance, and understand safety precautions.
Quick answers from the manual
Quick answer
- The BaByliss 2385U is a hair curling wand with adjustable heat settings (120°C-210°C) and an automatic 72-minute shut-off. It includes a heat protective glove and mat. p. 4, 5
Key actions
- Turn on the appliance p. 4
- Turn off the appliance p. 4
First start
- Prepare hair by drying and combing. Select heat setting, wait for LED to stop flashing, and use the heat glove while wrapping hair. p. 4
Show 4 more answers Show less
Problems and fixes
It has an automatic shut-off after 72 minutes. Press 'I' to restart.
p. 2, 5Maintenance and reset
- Do not wrap the lead around the appliance; coil it loosely by the side. p. 5
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Min - 2 | 120°C - 130°C | Lowest heat setting | p. 4 |
| 2 - 4 | 130°C - 150°C | Low-medium heat setting | p. 4 |
| 4 - 6 | 150°C - 170°C | Medium heat setting | p. 4 |
| 6 - 8 | 170°C - 190°C | Medium-high heat setting | p. 4 |
| 8 - Max | 190°C - 210°C | Highest heat setting | p. 4 |
Where to find it in the PDF
- Safety Warnings p. 1, 2, 3
- Instructions for Use p. 4
- Care and Maintenance p. 5
- Guarantee and Service p. 6, 7, 8
Table of contents
Quick guide from the manual
The BaByliss 2385U Tight Curls Wand is designed for styling hair. This guide covers essential safety, operation, and maintenance. Always ensure the appliance is used on dry, combed hair and keep it away from water. The device features an automatic shut-off after 72 minutes of continuous use.
Safety Precautions
- Water Warning: Do not use in the bathroom, near basins, bathtubs, or other vessels containing water. Do not immerse in liquid.
- Heat Warning: The appliance gets very hot. Avoid contact with skin, eyes, ears, face, and neck.
- Child Safety: Keep out of reach of children at all times, including during the cooling process.
- Damage: Inspect the lead and appliance before use. If damaged, discontinue use immediately and contact the manufacturer. Do not attempt repairs yourself.
- Storage: Allow the appliance to cool completely before storing. Do not coil the lead tightly around the appliance.
Instructions for Use
- Ensure hair is dry and combed through to remove tangles. Divide hair into sections.
- Press the button marked 'I' to turn the appliance on.
- Select the desired heat setting using the dial on the handle. The LED light will flash until the temperature is reached.
- Wear the provided heat protective glove on the hand wrapping the hair.
- Take a section of hair, starting 2 inches from the scalp. Place the appliance next to the hair section with the tip pointing down towards the shoulder.
- Wind the hair around the barrel until you reach the ends.
- Hold for 5-8 seconds, depending on hair type and heat setting.
- Unwind or release the hair and pull the appliance away. Allow the curl to cool before styling.
- After use, press the '0' button to switch off, unplug, and allow to cool.
Heat Settings
Always perform a test on initial use to determine the correct temperature for your hair type. Start on the lowest setting and increase as needed.
- Min - 2: 120°C - 130°C (For delicate, fine, or coloured hair)
- 2 - 4: 130°C - 150°C
- 4 - 6: 150°C - 170°C
- 6 - 8: 170°C - 190°C
- 8 - Max: 190°C - 210°C (For thicker hair)
Care and Maintenance
- Do not wrap the lead around the appliance; coil it loosely by the side.
- Do not use the appliance at a stretch from the power point.
- Always unplug after use.
- Use the provided heat mat during and after styling to protect surfaces.
Support and Service
For further advice or returns, contact the Conair Customer Care Line at 03705 133 191 (09:00 to 17:00 Monday to Friday) or email [email protected]. When returning the product, include your returns number, name, address, proof of purchase, and details of the fault.
Practical help
Common problems
Ensure the plug is connected to a power source and the button marked 'I' is pressed.
The device has an automatic shut-off feature after 72 minutes. Press the 'I' button to turn it back on.
Ensure hair is dry and combed. Try a higher heat setting if your hair is thick, or hold the hair on the barrel for the full 8 seconds.
Before use
- Ensure hair is dry and free of tangles.
- Check the lead and appliance for any signs of damage.
- Wear the provided heat protective glove.
- Place the heat mat on a suitable surface.
- Ensure the appliance is not near water.
Show more Show less
Specs in practice
- Auto Shut Off
- The device automatically turns off after 72 minutes of continuous use for safety.
- Heat Settings
- Adjustable from 120°C to 210°C to suit different hair types (fine to thick).
Model compatibility
- For domestic use only.
- Not for use in bathrooms or near water.
- Do not use on very young children.
Manual page author
Michael Turner
Technical manual editor