User Manual for BaByliss 2357U Titanium Brilliance Curls 32mm
Comprehensive user guide for the BaByliss 2357U Titanium Brilliance Curls 32mm. Includes setup, temperature settings, safety warnings, and maintenance instructions.
Quick answers from the manual
Quick answer
- The BaByliss 2357U is a hair curler with 6 heat settings (160°C-210°C), a 60-minute auto shut-off, and a safety lock feature that engages 5 seconds after activation. p. 4, 5
Key actions
- Turn on/off p. 4, 5
- Adjust temperature p. 4
First start
- Plug in, hold the power button for 1-2 seconds to turn on, and select the desired temperature using the +/- buttons. p. 4
Show 4 more answers Show less
Problems and fixes
Hold the '+/-' button for 1-2 seconds to unlock.
p. 4It has a 60-minute auto shut-off. Restart by holding the power button.
p. 3, 5Maintenance and reset
- Unplug after use, allow to cool, and coil the lead loosely by the side. p. 3, 6
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Temperature Range | 160°C - 210°C | 6 selectable heat settings. | p. 5 |
| Auto Shut Off | 60 minutes | Automatic safety shut-off. | p. 3, 5 |
| Guarantee | 3 years | Consumer guarantee (UK only). | p. 7 |
Where to find it in the PDF
- Safety Cautions p. 1, 2, 3
- Instructions for Use p. 4, 5
- Care & Maintenance p. 6
- Guarantee p. 7, 8
Table of contents
Quick Guide
The BaByliss 2357U Titanium Brilliance Curls 32mm is a hair styling tool featuring 6 temperature settings and an automatic shut-off function. Key operation involves holding the power button to turn it on, using the +/- buttons to select heat, and utilizing the safety lock feature which activates after 5 seconds of inactivity.
Safety Precautions
- Burn Hazard: The appliance gets extremely hot. Always hold by the handle and avoid contact with skin, eyes, ears, face, and neck.
- Children: Keep out of reach of children at all times, including during cooling. Do not use on very young children.
- Water Safety: UK Only: Do not use in the bathroom. Outside the UK: If used in a bathroom, unplug after use. Do not use near bathtubs, showers, or basins.
- Damage: Do not use if the appliance or lead is damaged. Do not attempt repairs yourself.
- Supervision: Do not leave the appliance unattended when switched on or plugged in.
Instructions for Use
- Ensure hair is dry, combed, and free of tangles. Divide hair into sections.
- Press and hold the power button for 1-2 seconds to turn the appliance on. The display will flash while heating.
- Use the '+/-' button to select the desired heat setting. The display will stop flashing once the temperature is reached.
- Place the appliance midway up a section of hair, press the lever, and spread hair between the lever and barrel.
- Release the lever, slide the appliance to the ends, and wind the hair around the barrel at a slight angle.
- Hold for 5-8 seconds depending on hair type.
- Press the lever to release the hair and allow the curl to cool before styling.
Switch Activation Control
The appliance features a delayed activation control. After 5 seconds of being on, the temperature buttons automatically lock. To adjust settings, hold the '+/-' button for 1-2 seconds to deactivate the lock mode. To turn off while in lock mode, hold the power button until it switches off.
Heat Settings
There are 6 temperature settings available: 160°C, 170°C, 180°C, 190°C, 200°C, and 210°C. Use lower settings for delicate, fine, bleached, or colored hair, and higher settings for thicker hair. Always perform a test on initial use.
Auto Shut Off
The appliance automatically switches off after 60 minutes of continuous use. To continue using, press and hold the power button for 1-2 seconds.
Care & Maintenance
- Always unplug the appliance after use.
- Allow the appliance to cool completely before storing.
- Do not wrap the lead around the appliance; coil it loosely by the side.
- Use the provided heat protective mat during and after styling to protect surfaces.
Guarantee
This BaByliss appliance is guaranteed for consumer use for 3 years within the United Kingdom. This covers defects under normal home use. For service or queries, contact the Conair Customer Care Line at 03705 133 191 or email [email protected].
Practical help
Common problems
The controls are locked. Hold the '+/-' button for 1-2 seconds to unlock.
The appliance has a 60-minute auto shut-off feature. Press and hold the power button to restart.
Ensure the appliance is plugged in and the power button has been held for 1-2 seconds to activate.
Before use
- Ensure hair is dry and combed.
- Check the lead and appliance for any signs of damage.
- Ensure you are not using the appliance in a bathroom (UK only).
- Place the appliance on a heat-resistant surface or use the provided heat mat.
- Ensure the appliance is kept away from children.
Show more Show less
Specs in practice
- Temperature Settings
- 6 levels: 160°C, 170°C, 180°C, 190°C, 200°C, 210°C.
- Auto Shut Off
- Safety feature that turns the unit off after 60 minutes of continuous use.
- Switch Activation Control
- Automatic lock mode that engages 5 seconds after turning the unit on.
Model compatibility
- UK Only: Do not use in the bathroom.
- Not for professional or non-domestic use.
Manual page author
Emily Carter
User documentation editor