User Guide for BaByliss 2393U Smooth Pro 235 Straightener

Quick guide for the BaByliss 2393U Smooth Pro 235 Straightener. Learn how to use heat settings, safety precautions, maintenance, and troubleshooting.

Quick answers from the manual

Quick answer

The BaByliss 2393U is a hair straightener with adjustable heat settings (140°C-235°C), ionic technology, and an automatic shut-off feature after 72 minutes. p. 4, 5

Key actions

Turn on and heat up p. 4
Select heat setting p. 4

First start

Plug in, press the power button, and select the appropriate heat setting for your hair type. p. 4

Show 4 more answers Show less

Problems and fixes

Damaged lead

Discontinue use immediately and contact the manufacturer for replacement.

p. 2

Maintenance and reset

Unplug after use and coil the lead loosely by the side of the appliance. p. 5

Technical specifications

Parameter	Value	Meaning	Pages
Heat Settings	140°C - 235°C	Adjustable temperature range for different hair types.	p. 4
Auto Shut Off	72 minutes	Time until automatic power-off.	p. 2, 5

Where to find it in the PDF

Safety Cautions p. 1, 2, 3
Instructions for Use p. 4
Features and Maintenance p. 5
Guarantee and Support p. 6, 7, 8

Table of contents

Quick guide from the manual

The BaByliss 2393U Smooth Pro 235 is a hair straightener designed for styling dry hair. It features adjustable heat settings, ionic technology, and an automatic shut-off safety feature. Always ensure the appliance is used according to the safety guidelines, particularly regarding heat and water proximity.

Safety Precautions

Burn Hazard: The appliance gets extremely hot. Keep out of reach of children during and after use.
Bathroom Use: UK users must not use this appliance in the bathroom. Outside the UK, if used in a bathroom, unplug after use and ensure an RCD is installed in the electrical circuit.
Damage: Do not use if the appliance or lead is damaged. Do not attempt repairs; contact the manufacturer.
Usage: Do not leave unattended while switched on. Do not place on heat-sensitive surfaces, even when using the provided heat mat.

Instructions for Use

Ensure hair is dry, combed, and divided into sections.
Press the power button to turn the appliance on; the indicator light will flash while heating.
Select the desired heat setting using the INTENSE and PROTECT buttons. The light will turn solid once the temperature is reached.
Place a section of hair between the plates near the roots.
Hold firmly and slide down the length of the hair to the tip.
Repeat for all sections.
Allow hair to cool before combing.
Switch off and unplug after use.

Heat Settings

Adjust the temperature based on your hair type. Start with the lowest setting and increase as needed.

PROTECT (Green): 140°C, 160°C
PROTECT (Yellow): 180°C
PROTECT (Orange): 200°C
INTENSE (Red): 220°C, 235°C

Features

Ionic Technology: Automatically activates when the appliance is turned on. A slight buzzing noise is normal.
Auto Shut Off: The appliance automatically switches off after 72 minutes of continuous use.
Heat Protection Mat: Provided for use during and after styling.

Care and Maintenance

Always unplug after use.
Do not wrap the lead around the appliance; coil it loosely by the side.
Do not use the appliance at a stretch from the power point.

Guarantee and Support

This appliance is guaranteed for consumer use for 5 years within the United Kingdom. For support, contact the Conair Customer Care Line at 03705 133 191 (Monday to Friday, 09:00 to 17:00) or email [email protected].

Practical help

Common problems

Appliance gets extremely hot

Only hold the handle during use. Avoid contact with skin, eyes, ears, face, and neck.

Damaged lead or appliance

Discontinue use immediately. Do not attempt repair. Contact the Conair Customer Care Centre for replacement.

Buzzing noise during use

This is normal; it is caused by the release of ions from the ports due to the Ionic Technology.

Before use

Ensure hair is dry and combed through to remove tangles.
Divide hair into sections.
Inspect the appliance and lead for signs of damage.
Ensure the appliance is not used in a bathroom (UK only).
Place the heat protection mat on a suitable surface.

Show more Show less

Specs in practice

Auto Shut Off: The device turns off automatically after 72 minutes of continuous operation.
Ionic Technology: Automatically activates upon power-on to assist with styling; may produce a slight buzzing sound.

Model compatibility

UK Only: Do not use in the bathroom.
Outside UK: If used in a bathroom, unplug after use and ensure an RCD is installed.

Manual page author

Emily Carter

User documentation editor

Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.