Home Appliances / Hair Stylers
BaByliss Power Smooth Hair Dryer Cleaning and Maintenance Guide
Learn how to properly clean and maintain your BaByliss Power Smooth hair dryer. This guide covers essential steps for filter cleaning and general appliance care to ensure optimal performance.
Quick answers from the manual
Quick answer
- This document provides instructions on how to clean and maintain your BaByliss Power Smooth hair dryer, specifically focusing on general cleaning and filter maintenance. p. 1
Key actions
- Clean the filter by twisting the rear filter to the left, brushing out debris, and twisting back to the right until it clicks. p. 1
- Wipe the exterior with a damp cloth only after the unit is unplugged and cool. p. 1
Problems and fixes
Filter maintenance
Twist the rear filter to the left to remove, clean with a soft brush, and twist to the right to reattach.
p. 1Show 2 more answers Show less
Maintenance and reset
- Regularly clean the filter and wipe the exterior with a damp cloth. p. 1
Where to find it in the PDF
- Cleaning and Maintenance p. 1
Table of contents
Important Information
This guide provides instructions on how to clean and maintain your BaByliss Power Smooth hair dryer. Following these procedures is essential to keep the appliance in the best possible condition and ensure safe operation.
General Care
To maintain the exterior and safety of your hair dryer, follow these guidelines:
- Always ensure the appliance is switched off, unplugged, and cool before cleaning.
- Wipe the outside of the appliance with a damp cloth. Ensure no water enters the appliance and it is completely dry before use.
- Do not wrap the power lead around the appliance. Instead, coil the lead loosely by the side of the appliance.
- Do not use the appliance at a stretch from the power point.
- Always unplug the appliance after use.
Cleaning the Filter
Regularly cleaning the filter prevents debris buildup and ensures optimal performance:
- Ensure the appliance is switched off, unplugged, and cool.
- Hold the handle of the appliance firmly.
- Twist the rear filter to the left to remove it.
- Use a soft brush to clean any hair and other debris from the filter.
- Replace the rear filter by aligning the grooves and turning it to the right until the filter clicks back into place.
Practical help
Common problems
Dirty or clogged filter
Remove the rear filter by twisting to the left, clean with a soft brush, and reattach by aligning the grooves and twisting to the right until it clicks.
Before use
- Ensure the appliance is switched off
- Ensure the appliance is unplugged
- Ensure the appliance is cool
- Check that the filter is clean and properly attached
Manual page author
Emily Carter
User documentation editor