Health / Personal Care
User Manual for Beautural 1-MR02US02 Fabric Shaver
Quick guide for the Beautural 1-MR02US02 Fabric Shaver. Learn how to use, maintain, replace blades, and safely operate your device with this concise manual.
Table of contents
Manual images
Click an image to enlargeQuick Guide from the Manual
The Beautural 1-MR02US02 is a fabric shaver designed for domestic use to remove lint and bobbles. It can be powered by 4 AA batteries or an AC power adapter. Important: When using the power adapter, remove the batteries from the device. Always test the shaver on a small, inconspicuous area of the fabric before full use.
Product Description
The device consists of the following components:
- ON/OFF/Speed Switch
- Battery Compartment Cover
- Fluff Collector
- DC-IN Jack
- Cutting Blades
- Shaver Foil
- Adjustable Spacer
- Replaceable Cutting Blades
- Cleaning Brush
- Power Adapter
Preparing for Use
To prepare the device:
- Batteries: Insert 4 AA batteries. Ensure the ribbon inside the compartment is underneath the batteries for easy removal.
- Power Adapter: Connect the adapter to the DC-IN jack. Remove batteries when using the adapter.
- Spacer: Use the adjustable spacer for delicate fabrics or to adjust the shaving height.
How to Use
- Lay the garment on a hard, flat surface.
- Stretch the fabric with one hand and keep the shaving head at a 90-degree angle to the fabric.
- Slide the shaver over the fabric.
- Empty the fluff collector regularly; do not let it exceed 3/4 full, as this will slow down the cutting blades.
Shaving Tips
- Knitted Fabrics: Guide the shaver in the direction of the knitting.
- Fabrics with Accessories: Avoid shaving over buttons, zippers, or other accessories.
- Thin Garments: Fold into two layers and lay over an ironing board.
- Quick Shaving: Slide the shaver around the top of the garment.
Maintenance and Care
Emptying the Fluff Collector
Pull the collector down slightly and lift it off to empty the contents.
Replacing Cutting Blades
- Unscrew the shaver foil.
- Carefully grasp the cutting blades' edge and pull them out.
- Insert new blades firmly into the shaver body.
- Screw the shaver foil back into place.
Cleaning
Use the provided cleaning brush to remove lint from the cutting blades. Use a slightly damp cloth to clean the shaver body and spacer. Ensure all parts are completely dry before reassembly.
Specifications
- Model: 1-MR02US02, LT-0005
- Power Supply: 4 x 1.5V AA batteries or AC Adapter (Input: 100-240V~ 50-60Hz 0.2A; Output: 6V 1A)
Customer Service
For support, contact us at [email protected] (US) or [email protected] (Canada). Phone: +1 909-391-3888.
Manufacturer information
Beautural
Practical help
Common problems
Shaver does not work
If using the power adapter, ensure batteries are removed. If using batteries, check that they are installed correctly.
Cutting blades are slow
The fluff collector is likely too full. Empty it so it is no more than 3/4 full.
Fabric damage
Always test on a small, inconspicuous area first. Ensure the spacer is used for delicate fabrics.
Before use
- Check package contents for all parts.
- Ensure the fluff collector is empty.
- Test on a small area of fabric.
- Insert 4 AA batteries or connect the AC adapter.
- Ensure the ribbon is under the batteries for easy removal.
Specs in practice
- Power Supply
- Supports 4x AA batteries or AC adapter (100-240V).
Images and diagrams
- Spacer removal: Hold the shaver, place thumb on the spacer, and pull forward.
- Blade replacement: Unscrew the foil, grasp the blade edge, and pull out.
Model compatibility
- Do not use on moist fabrics.
- Not for use by children without supervision.
- Do not use near water.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.