Power / Batteries & Chargers
User Manual for Belkin BoostCharge Pro Magnetic Power Bank 10K
Quick guide and safety information for the Belkin BoostCharge Pro Magnetic Power Bank 10K (BPD008). Includes operating conditions, technical specifications, and safety warnings.
Table of contents
Quick guide from the manual
The Belkin BoostCharge Pro Magnetic Power Bank 10K (Model BPD008) is a portable wireless charging device. This document provides essential safety instructions, operating conditions, and technical specifications for the product.
Operating conditions
To ensure safe and optimal performance, please adhere to the following conditions:
- Operating Temperature: 0°C to 35°C.
- Storage: Avoid storing the device in extremely hot or cold locations. Room temperature is recommended.
- Environment: Keep the product away from rain, snow, liquids, and moisture.
- Heat Sources: Keep away from fire, direct sunlight, and combustible gases.
Safety warnings
Failure to follow these instructions may result in fire, electric shock, injury, or damage to the product or property:
- Battery Safety: Contains small parts (battery cells) that pose a choking hazard. Keep out of reach of children.
- Ingestion: If a battery is swallowed, seek immediate medical assistance as it can cause severe burns, tissue perforation, and death.
- Physical Integrity: Do not crush, bend, puncture, or shred the product.
- Maintenance: Do not attempt to service, modify, or disassemble the product.
- Usage: Do not use the product if visible defects are observed.
- Power Supply: Use only power supplies recommended or sold by Belkin to avoid increased risk of fire or electric shock.
Technical specifications
The power bank supports the following input and output configurations:
- Input USB-C1/C2: 5V⎓3A, 9V⎓2.22A
- Output USB-C1/C2: 5V⎓3A, 9V⎓2.22A
- Output Wireless: 14V⎓15W (max)
- Output (USB-C + Wireless): 5V⎓2A, 7.5V⎓7.5W (max)
- Output (USB-C + USB-C): 5V⎓3A (shared)
- Output (USB-C + USB-C + Wireless): 5V⎓2A (shared), 7.5V⎓7.5W (max)
Disposal and recycling
This product must be collected separately from other waste at the end of its useful life. Please dispose of it at specialized waste disposal centers for electrical and electronic equipment (WEEE) or return it to the dealer when purchasing a new equivalent product.
Manufacturer information
Belkin
Practical help
Common problems
Device not charging
Ensure the power bank is charged and the cable is securely connected to the input port.
Wireless charging not working
Ensure the device is compatible and properly aligned with the magnetic area. Remove thick cases that may interfere with charging.
Visible defects
Do not use the product if visible defects are observed; contact Belkin support for assistance.
Before use
- Ensure the power bank is fully charged.
- Check for any visible damage to the device or cables.
- Verify the operating temperature is between 0°C and 35°C.
- Ensure the device being charged is compatible with the power bank's output.
Specs in practice
- Input USB-C1/C2
- 5V/3A or 9V/2.22A for recharging the power bank.
- Output Wireless
- Up to 15W max for wireless charging.
- Operating Temperature
- 0°C to 35°C; do not use outside this range.
Model compatibility
- Compatible with devices supporting Qi2 wireless charging.
- Wireless charging speed is influenced by device protocols, ambient temperature, and battery level.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.