User Guide for Bella 22T154 and Bowie 22T163 Table Lamps

Quick guide from the manual

This document provides essential safety and assembly instructions for the Bella 22T154 and Bowie 22T163 table lamps. These lamps are designed for domestic indoor use only. Always ensure the lamp is switched off and unplugged before performing any maintenance or bulb replacement.

Assembly Instructions

1. Ensure the lamp is switched off before connecting to the electricity supply.
2. Loosen the Socket Ring (C) from the lamp holder.
3. Remove the cover of the lamp shade (B) before use.
4. Place the Lamp Shade (B) onto the Lamp Holder (A).
5. Secure the shade in place by tightening the Socket Ring (C).
6. Install a compatible bulb (Max 25W E27) into the lamp holder.
7. Check that all components are assembled correctly before connecting to the mains supply.

Safety Precautions

• Indoor Use Only: This lamp is designed for domestic indoor use only.
• Electrical Safety: Never touch the bulb while the lamp is lit. Surfaces may become hot.
• Bulb Replacement: Always switch off the lamp and unplug it from the mains socket before cleaning or replacing a bulb. Allow the bulb to cool for at least 10 minutes before touching it.
• Handling: Do not carry the appliance by the mains cable. Keep the cable away from heat and sharp objects.
• Damage: If the lamp stops working unexpectedly or appears to malfunction, unplug it immediately and seek professional advice.

Technical Specifications

• Rated Voltage: 220-240V ~ 50Hz
• Bulb Requirement: Max 25W E27 Edison Screw (not included)
• Recommended Bulb: 7-9W LED for medium brightness

Maintenance

Keep all ventilation slots and filters clear of debris. Do not drop or insert objects into the openings. If the external flexible cable or cord of this luminaire is damaged, it must be exclusively replaced by the manufacturer or their service agent to avoid a hazard.