Garden / Outdoor
Bosch EasyMower 18V-32-200 Cordless Lawnmower User Guide
Quick guide for the Bosch EasyMower 18V-32-200 cordless lawnmower, covering assembly, battery operation, mowing tips, maintenance, and troubleshooting.
Table of contents
Manual images
Jump to the sectionQuick guide from the manual
This document provides essential instructions for the safe operation and maintenance of the Bosch EasyMower 18V-32-200. Always remove the battery and isolator key before performing any maintenance, cleaning, or adjustments. The mower is intended for domestic lawn mowing only and should not be used in wet conditions or on excessively steep slopes.
Assembly and Operation
The mower requires assembly of the handle and grassbox before first use. Refer to the provided figures for step-by-step visual guidance on handle mounting, grassbox assembly, and height-of-cut adjustment. Ensure the isolator key is inserted correctly to operate the machine and removed whenever you leave the mower unattended or perform maintenance.
Battery Handling
Use only the specified Bosch battery charger. The battery is supplied partially charged; charge it fully before the first use. The charger features intelligent monitoring to protect the battery. If the battery charge indicator flashes red, refer to the troubleshooting section. Store the battery in a cool, dry place, ideally at 5°C, and keep it away from direct sunlight and moisture.
Maintenance and Safety
Always wear gardening gloves when working near the blades. Keep all nuts, bolts, and screws tight to ensure safe operation. Regularly inspect the grass bag for wear. Never clean the mower with a high-pressure washer or garden hose; use a soft, dry brush to remove residue. If the machine vibrates abnormally, stop immediately and inspect the blade.
Troubleshooting
If the motor fails to start, check if the battery is charged, the isolator key is fully inserted, or if the motor protector has activated due to grass being too long. If the finish is ragged, increase the cutting height or replace the blunt blade. Always disengage the isolator key before clearing any blockages.
Manufacturer information
Bosch
Practical help
Common problems
Motor refuses to start
Check if the battery is charged, the isolator key is inserted correctly, or if the motor protector has activated (allow to cool and increase cutting height).
Machine leaves a ragged finish
Increase the cutting height or replace the blunt cutting blade.
Excessive vibrations or noise
Check if the blade nut/bolt is loose (tighten to 17 Nm) or if the blade is damaged.
Before use
- Inspect the area for wildlife, stones, sticks, and wires.
- Ensure the blade and blade assembly are not worn or damaged.
- Check that all guards are in place and properly mounted.
- Ensure the battery is fully charged.
- Wear non-slip protective footwear and long trousers.
Specs in practice
- Cutting width
- 32 cm, the width of the path mowed in one pass.
- Height of cut
- Adjustable to 20, 40, or 60 mm.
- Grass bag capacity
- 32 liters.
Images and diagrams
- Figure A: Delivery scope and components.
- Figure B: Handle mounting procedure.
- Figure C-D: Grassbox assembly and fitting.
- Figure E: Height of cut adjustment.
- Figure G-H: Inserting/removing the isolator key and switching on/off.
Model compatibility
- Compatible with Bosch PBA 18V 4.0Ah, 5.0Ah, and 6.0Ah batteries.
- Use only with specified Bosch AL 18 series chargers.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.