Assembly Instructions for ELUSIA 90 x 190cm Daybed

Comprehensive assembly and maintenance guide for the ELUSIA 90 x 190cm daybed, including hardware lists, step-by-step assembly procedures, and care instructions.

Table of contents

Quick guide from the manual

This document provides assembly instructions for the ELUSIA 90 x 190cm daybed. Before starting, ensure you have a clean, flat area for assembly to prevent scratches. It is recommended to have two people for assembly. Do not force any joints during the process. Tighten all screws to 70% initially, and finish tightening to 100% only after all screws have been installed.

Assembly

Follow these steps to assemble your daybed:

Preparation: Locate all parts and group/count the hardware. Ensure you have the necessary tools (hammer, screwdriver).
Step 1: Attach the M8 x 30mm dowels to the headboard.
Step 2: Assemble the frame components using the provided M6 x 50mm screws and Allen keys.
Step 3: Connect the side panels to the main frame.
Step 4: Secure the structure using the M6 x 50mm screws and flat washers.
Step 5: Install the bed slat side fitters and slats.
Step 6: Assemble the trundle bed frame using M6 x 55mm screws, washers, and spring washers.
Step 7: Attach the slats to the trundle frame using M6 x 35mm screws and M4 x 38mm screws.
Step 8: Finalize the trundle frame assembly.
Step 9-10: Slide the trundle bed into the main daybed frame.

Maintenance

To keep your daybed in good condition:

Regularly check that all fasteners are properly tightened and retighten if necessary.
For solid timber/veneers/lacquered surfaces: Remove spills immediately with a damp cloth, then wipe dry. Furniture polishes are not recommended.
For melamine, laminate, linoleum, and metal: Dust regularly with a dry cloth. Use a damp cloth and mild detergent for stubborn stains.
Avoid placing the bed near open fires or heat sources like radiators.
Ensure the room is well-ventilated to prevent mold growth.

Practical help

Common problems

Missing parts

Keep the assembly instructions; they are the clearest way to communicate with your store if a part is missing.

Joints are difficult to fit

Never force the joints. Ensure all parts are correctly aligned and screws are only tightened to 70% until the end.

Mold growth

Ensure the room is well-ventilated to maintain low humidity levels in and around the bed.

Before use

Check that all fasteners are properly tightened.
Ensure you have a clean, flat assembly area (carpet or blanket recommended).
Verify you have all necessary tools (hammer, screwdriver).
Group and count all hardware before starting.
Ensure the mattress size is 190 x 90 cm.

Specs in practice

Recommended mattress size: 190 x 90 cm
Tightening procedure: Tighten to 70% initially, then 100% after all screws are installed.

Model compatibility

Designed for a 190 x 90 cm mattress.

Show more Show less

Manual page author

David Miller

Documentation analyst

Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.