Sports / Fitness
Eufab 11231ON Frame Holder User Guide
User guide for the Eufab 11231ON frame holder, including installation instructions, safety precautions, and technical specifications for secure bicycle transport.
Table of contents
Product Overview
The Eufab frame holder is designed to securely attach a bicycle to the U-bracket of a bicycle carrier. It is intended for private use and is not suitable for commercial applications. The device must not be used by children or individuals without the necessary specialist knowledge.
Technical Specifications
The holder is compatible with U-bracket diameters of 25 mm and 30 mm, and bicycle frame diameters ranging from 30 mm to 60 mm. Two models are available: the 11230 (approx. 10.5 cm length, 0.260 kg) and the 11231 (approx. 30 cm length, 0.340 kg).
Installation
To install the holder, open the pipe clamp by completely unscrewing the knob screw. Select the appropriate rubber insert (25 mm or 30 mm) based on your bicycle carrier's U-bracket diameter and place it around the bar. Position the pipe clamp over the insert, press it together, and insert the knob screw through both holes. Screw the frame holder onto the knob screw thread. Finally, secure the bicycle frame using the integrated tension belt and tighten the knob screw firmly.
Safety and Maintenance
Always observe the safety instructions provided in the manual for your specific bicycle carrier. Before driving, ensure the bicycle is secured according to the carrier's instructions, including the use of tension belts and safety straps. Clean the holder with a soft, slightly moist cloth and a mild cleaning agent; avoid solvents, petrol, or aggressive cleaners. Ensure no liquids enter the tube of the holder. Store the device in a dry place when not in use.
Contact Information
For further assistance, contact EAL GmbH, Otto-Hausmann-Ring 107, 42115 Wuppertal, Germany. Phone: +49 (0)202 42 92 83 0, Email: [email protected], Website: www.eal-vertrieb.com.
Official resources from the manual
Manufacturer information
EUFAB
Practical help
Common problems
Visible damage to the frame holder
If the holder is visibly damaged, it is no longer safe to use and must be replaced.
Bicycle not secure during transport
Ensure the bicycle is secured according to the specific instructions of your bicycle carrier, including the use of additional tension belts and safety straps.
Before use
- Check the package contents for integrity and completeness.
- Verify the diameter of your bicycle carrier's U-bracket (25 mm or 30 mm).
- Select the correct rubber insert (25 mm or 30 mm) for your U-bracket.
- Ensure the bicycle frame diameter is within the 30-60 mm range.
- Read all safety instructions provided in the manual.
Specs in practice
- U-bracket diameter
- The diameter of the bar on your bike rack where the holder attaches (25 mm or 30 mm).
- Bicycle frame diameter
- The thickness of the bike frame tube that the holder can accommodate (30-60 mm).
Images and diagrams
- 1: Knob screw
- 2: Pipe clamp
- 3: Rubber insert 25 mm
- 4: Rubber insert 30 mm
- 5: Frame holder with tension belt
Model compatibility
- Not intended for use by children.
- Not for commercial use.
- Compatible with 25 mm and 30 mm U-brackets.
- Compatible with 30-60 mm bicycle frames.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.