Health / Medical Devices
User Guide for Fisher & Paykel 120cm Series 9 Integrated Insert Wall Rangehood
Quick reference guide for the Fisher & Paykel 120cm Series 9 Integrated Insert Wall Rangehood (Model HPB12048-2). Includes specifications, dimensions, and key features for installation and operation.
Table of contents
Quick guide from the manual
This document serves as a quick reference guide for the Fisher & Paykel 120cm Series 9 Integrated Insert Wall Rangehood (Model HPB12048-2). It outlines the primary specifications, dimensions, and key features of the appliance to assist with installation and daily operation.
Product Overview
The Series 9 Integrated Insert Wall Rangehood is designed to blend seamlessly into kitchen cabinetry. It features edge-to-edge extraction to maximize the capture of steam, odours, and grease. The unit is powered by a brushless DC motor, which provides efficient and quiet operation.
- Extraction: Edge-to-edge design with 5 fan speeds.
- Lighting: Dimmable LED strip lighting for full surface illumination.
- Control: Soft-touch buttons and an included remote control.
- Maintenance: Multi-layered, dishwasher-safe filters.
Specifications
Key technical data for the unit:
- Dimensions: 462mm (Height) x 1180mm (Width) x 480mm (Depth).
- Maximum Airflow: 1910 m³/hr.
- Noise Level: 57 dBA (at speed 3).
- Power Requirements: 230V.
- Ducting: Vertical only.
Installation and Maintenance
The rangehood is designed for simple installation within kitchen cabinetry. Ensure the cabinet cutout accommodates the specified dimensions. The filters are designed for easy removal and are dishwasher safe to ensure effective grease extraction over time.
Support
For further assistance, Fisher & Paykel offers 24/7 customer support. You can contact them at 0800 372 273 or visit their website at www.fisherpaykel.com.
Official resources from the manual
Practical help
Common problems
Grease buildup on filters
The filters are dishwasher safe and should be cleaned regularly to maintain extraction efficiency.
Noise during operation
Ensure the ducting is installed correctly; this model uses a brushless DC motor designed for low noise, so excessive noise may indicate an installation issue.
Before use
- Verify the installation space matches the 1180mm width and 480mm depth requirements.
- Ensure vertical ducting is available for installation.
- Check that the power supply is 230V.
- Confirm the cabinet structure can support the integrated unit.
Specs in practice
- 462mm x 1180mm x 480mm
- Physical dimensions (Height x Width x Depth) for cabinet integration.
Images and diagrams
- The dimension diagram illustrates the physical footprint of the unit, highlighting the height, width, and depth required for cabinet cutout planning.
Model compatibility
- Vertical ducting only.
- Designed for integrated cabinetry installation.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.