User Manual for Stoves STERLING CHIM 90T, 100T, 110T Chimney Cooker Hood

Quick guide from the manual

This manual provides essential instructions for the installation, operation, and maintenance of the Stoves STERLING CHIM 90T, 100T, and 110T cooker hoods. Always ensure the appliance is installed by a qualified technician and that all safety regulations are followed.

Safety Information

• Installation: The minimum safety distance between the hob and the hood is 650 mm. Ensure the mains voltage matches the rating label inside the hood.
• Ventilation: Connect the hood to an exhaust flue with a minimum diameter of 120 mm. Do not connect to ducts carrying combustion fumes (boilers, fireplaces).
• Usage: Do not flambé food under the hood. Ensure adequate room ventilation if using the hood simultaneously with gas or other fuel-burning appliances.
• Electrical: The appliance must be properly earthed (Class I). If the supply cord is damaged, it must be replaced by the manufacturer or a service technician.

Controls

The control panel features the following functions:

• Button 1: Starts the motor at speed one.
• Button 2: Starts the motor at speed two.
• Button 3/i: Press briefly for speed three. Press for 2 seconds to activate boost mode for 6 minutes (for heavy cooking fumes).
• Light Button: Turns the lighting system on and off.
• Stop: Button 1 switches the motor to speed 1 before stopping it.

Cleaning and Maintenance

• Grease Filters: Must be cleaned every 2 months of operation, or more frequently with intensive use. These are dishwasher safe.
• Charcoal Filters: Cannot be washed or regenerated. Replace approximately every 4 months of operation, or more frequently with intensive use.
• General Cleaning: Use a damp cloth and neutral liquid detergent.

Technical Data

• Electricity Supply: 230 - 240V ~ 50/60Hz
• Motor Rating: 250 W
• Noise Level: 50 dBA (Pos 1) to 69 dBA (Boost)
• Extraction Rate: 280 m3/h (Pos 1) to 750 m3/h (Boost)