Home Appliances / Small Kitchen Appliances
User Manual for Flama 2221FL, 2222FL, 2223FL, 2224FL Blender
Quick guide for the Flama blender series (2221FL-2224FL). Learn how to assemble, operate, clean, and troubleshoot your device safely.
PDF source: Français · summary: English
Quick answers from the manual
Quick answer
- The Flama blender is designed for a maximum of 2 minutes of continuous operation. Always ensure the blade holder is securely screwed onto the bottle before attaching it to the motor base. p. 15, 16
Key actions
- Assemble the blade support to the bottle, then attach to the motor base. p. 15
- Clean the blades and bottle after each use. p. 15
First start
- Clean all parts in contact with food before the first use. p. 15
Show 3 more answers Show less
Problems and fixes
Appliance does not work
Check power connection and blade assembly attachment.
p. 16
Device switches off
Unplug and wait 30 minutes for the motor to cool.
p. 16Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Max operating time | 2 minutes | Maximum continuous usage time | p. 14, 16 |
Where to find it in the PDF
- Safety Instructions p. 13, 14
- Operating Instructions p. 15, 16
- Troubleshooting p. 16
Table of contents
Manual images
Click an image to enlargeQuick Guide
This blender is designed for a maximum of 2 minutes of continuous operation. If this limit is exceeded, allow the motor to cool down before using it again. Always ensure the blade holder is securely screwed onto the bottle before attaching it to the motor base. Do not process hot ingredients (max 50°C) or glutinous substances like jam.
Product Description
- 1. Base motor
- 2. ON/OFF switch
- 3. Blade support
- 4. Blades
- 5. Bottle
- 6. Bottle lid
Operating Instructions
Before first use: Clean all parts that come into contact with food as described in the cleaning section.
Usage:
- Place the base motor on a stable, clean, and dry surface.
- Ensure the base motor is disconnected from the power supply.
- Unwind the cable completely.
- Place previously cut food into the bottle (do not exceed 50°C).
- Screw the blade support onto the bottle securely.
- Place the bottle on the motor base and turn it clockwise until it clicks into the LOCK position.
- Connect the device to the power supply.
- Turn the ON/OFF knob clockwise to start blending.
- Release the button to stop.
- After use, unplug the device, detach the bottle, and unscrew the blade support.
Cleaning and Maintenance
Warning: Unplug the appliance before cleaning. Do not immerse the base motor, cable, or plug in water. Do not use abrasive cleaning agents.
- Wash the blades, bottles, and lids with water and a little detergent.
- Alternatively, mix water with a little detergent in the bottle and run the appliance for 15 seconds to clean.
- Clean the base motor with a damp cloth and dry it with a dry cloth.
Troubleshooting
If the appliance does not work, check if it is plugged in and if the blade assembly is correctly connected to the bottle. If there is a slight burning smell during the first few uses, this is normal and will disappear. If the device switches off, the motor may be overheating; unplug it and wait 30 minutes before restarting.
Safety Warnings
- Blades are sharp; handle with caution.
- Do not use the appliance if it is not working properly.
- Do not leave the appliance unattended while in operation.
- Never operate the appliance with an empty or overfilled bottle.
- If the power cord is damaged, it must be replaced by an authorized Flama technical service.
Manufacturer information
FLAMA, SA
Practical help
Common problems
Appliance does not work after turning the ON/OFF button
Ensure the appliance is plugged into the mains and the blade assembly is correctly connected to the bottle.
Slight burning smell during operation
This is normal during the first few uses and will disappear. If it persists, ensure the motor is not overloaded.
Appliance switches off during operation
Motor overheating. Unplug the appliance and wait 30 minutes before plugging it in again.
Blades do not rotate
Check for poor assembly or ingredients that are too large; cut ingredients into smaller pieces.
Bottle leaks
Check for poor assembly; ensure the blade support is correctly screwed onto the bottle.
Before use
- Clean all parts in contact with food
- Check that supply voltage matches the rating plate
- Cut food into smaller pieces
- Ensure food temperature does not exceed 50°C
- Ensure the blade holder is securely screwed onto the bottle
Show more Show less
Specs in practice
- Maximum operating time
- 2 minutes. Exceeding this may overload the motor.
- Maximum food temperature
- 50°C. Do not process hot ingredients.
Images and diagrams
- 1: Base motor
- 2: ON/OFF switch
- 3: Blade support
- 6: Bottle lid
Model compatibility
- Do not use for glutinous substances like jam or marmalade.
Manual page author
Michael Turner
Technical manual editor