Software / Apps Services
User Manual for Flama 1256FL Espresso Coffee Machine
Quick guide for the Flama 1256FL espresso machine, covering setup, coffee preparation, milk frothing, cleaning, descaling, and troubleshooting.
Table of contents
Quick guide from the manual
This document provides essential instructions for operating and maintaining the Flama 1256FL espresso coffee machine. Key procedures include initial setup, coffee brewing, milk frothing, and periodic descaling to ensure optimal performance. Always ensure the machine is placed on a stable, heat-resistant surface and connected to an earthed power outlet.
Device Description
The machine features a water tank, steam adjustment knob, control panel, cup rack, steam wand, drip tray, and a portafilter with various filter inserts (1-cup, 2-cup, and E.S.E.). The control panel includes buttons for steam, 2-cup/long coffee, 1-cup coffee, and power (ON/OFF).
Before First Use
Ensure all packaging is removed and all components are present. Perform an initial cleaning cycle by filling the water tank, attaching the portafilter, and running the 1-cup coffee function without coffee grounds. Ensure the steam knob is in the CLOSED position during this process.
Operating Instructions
To make coffee, fill the water tank, turn on the machine, and wait for the coffee buttons to stop blinking, indicating the machine is heated. Place the desired filter in the portafilter, add and tamp the coffee, and lock the portafilter into the machine. Place a cup under the spout and press the desired coffee button.
Steam and Milk Frothing
Press the steam button and wait for it to stop blinking. Fill a container 1/3 full with milk. Insert the steam wand 1 cm into the milk and slowly turn the steam knob to the steam/hot water position. Once the milk is heated, turn the knob to CLOSED and press the steam button to deactivate. After use, clean the steam wand immediately.
Cleaning and Maintenance
Unplug and cool the machine before cleaning. The portafilter is not dishwasher safe. Regularly wash the water tank, drip tray, cup rack, and filters with warm water and detergent. If the steam wand clogs, use a needle to clear it.
Descaling
Perform a descaling cycle approximately every 300 coffees, or when the control panel buttons blink 3 times upon startup. Use 10g of lemon juice or citric acid in the water tank filled to the MAX line. Run the solution through the steam wand for 2 minutes, then repeat the process with clean water to rinse the circuit.
Energy Saving
The machine features an auto shut-off function that turns the device off after 25 minutes of inactivity.
Manufacturer information
FLAMA, SA
Practical help
Common problems
No coffee comes out
Check if the water tank is full and properly installed. Ensure the machine has finished the preheating process.
No steam comes out
Check if the steam wand is blocked or if the steam selector is in the correct position. Wait for the preheating process to complete.
Coffee is too weak
Use a finer grind or ensure the coffee is properly tamped in the filter.
Coffee buttons flash rapidly
The machine is too hot after using the steam function. Allow it to cool down.
All buttons flash
The machine requires a descaling cycle. Follow the descaling instructions in the manual.
Before use
- Remove all packaging materials.
- Verify all components are included.
- Fill the water tank with potable water (do not exceed MAX).
- Ensure the steam knob is in the CLOSED position.
- Perform an initial cleaning cycle before first use.
Specs in practice
- Auto shut-off
- The machine turns off automatically after 25 minutes of inactivity to save energy.
- Descaling frequency
- Recommended every 300 coffees or when the control panel buttons blink 3 times on startup.
Images and diagrams
- 1: Water tank lid
- 3: Steam adjustment knob
- 6: Steam wand
- 11: Portafilter
- 13-16: Control panel buttons (Steam, 2-cup, 1-cup, ON/OFF)
Model compatibility
- Use only coffee ground for espresso machines.
- Use whole milk for best frothing results.
- Portafilter is not dishwasher safe.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.