Automotive / Roof Racks
Installation Guide for Front Runner Audi E-Tron Slimline II Roof Rail Rack Kit (KRAE001T)
Installation guide for the Front Runner Slimline II Roof Rail Rack Kit for Audi E-Tron (2020-Current). Includes component list, required tools, and assembly preparation steps.
Quick answers from the manual
Quick answer
- This document provides the initial setup and component list for installing the Front Runner Slimline II Roof Rail Rack Kit on an Audi E-Tron (2020-Current). p. 1, 2
Key actions
- Gather all components and verify against the 'In the Box' list. p. 2
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Tray Dimensions | 1255mm x 1358mm | Width and Length of the Slimline II Tray | p. 2 |
Where to find it in the PDF
- Safety and Overview p. 1
- Components and Tools p. 2
Table of contents
Quick guide from the manual
This document serves as the initial installation guide for the Front Runner Slimline II Roof Rail Rack Kit designed for the Audi E-Tron (2020-Current). It covers the preparation phase, including component identification and required tools. Before beginning the installation, ensure you have all the necessary parts and tools, and read all safety warnings provided.
Important Safety Warnings
It is critical that all Front Runner products are properly and securely assembled and attached to your vehicle. Improper attachment could result in an automobile accident and could cause serious bodily injury or death. You are responsible for assembling and securing all products to your vehicle, checking the attachments prior to use, and periodically inspecting the products for adjustment, wear, and damage. If you do not have mechanical experience, you should have the product installed by a professional installer.
Getting Organized
Before you begin, open all your Front Runner rack kit boxes and gather the assembly instructions for the various components. A complete kit contains a Front Runner Mounting System specific to your vehicle and a Front Runner Rack Tray or Load Bar Slats.
In the Box:
- 1 x Slimline II Tray (1255mm W x 1358mm L)
- 1 x Spacer Pair
- 2 x Grab On Feet Pair
- 2 x Outer Grip Pair
- 2 x Inner Grip Pair
- 1 x Wind Deflector
Tools Needed
To assemble the kit, you will need the following tools:
- 5mm hex key
- 13mm wrench
Always check online at www.frontrunneroutfitters.com for the latest fitment guide.
Official resources from the manual
Practical help
Common problems
Improper installation
Read all instructions carefully and ensure all components are securely attached to the vehicle. If you lack mechanical experience, have the product installed by a professional.
Before use
- Verify all components are present according to the 'In the Box' list.
- Ensure you have the required 5mm hex key and 13mm wrench.
- Read all safety warnings before beginning assembly.
- Check online for the latest fitment guide at www.frontrunneroutfitters.com.
Specs in practice
- Slimline II Tray
- 1255mm (Width) x 1358mm (Length)
Images and diagrams
- Figure 1.1 shows the exploded view of the rack assembly, identifying the placement of the tray, spacers, and grip pairs.
Model compatibility
- Designed specifically for Audi E-Tron (2020-Current).
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.