Green Lion 12V Jump Starter Savior User Guide

Quick guide from the manual

The Green Lion Savior 12V Jump Starter is a multi-functional device designed for jump-starting gasoline (up to 8.0L) and diesel (up to 6.0L) engines. It also features an integrated air inflator, LED flashlight, and multiple charging ports. Always ensure the device is charged to at least 80% before attempting to jump-start a vehicle.

Setup and jump-starting

1. Connect the jumper cables to the jump starter socket, ensuring the plug is fully inserted.
2. Attach the red clamp to the positive (+) terminal and the black clamp to the negative (-) terminal of the car battery.
3. Slide the jump starter ON/OFF switch to the ON position.
4. Start the vehicle.
5. Remove the clamps from the battery terminals within 30 seconds of starting the engine.

Air pump operation

1. Remove the air duct from the back of the device.
2. Connect the tire nozzle to the tire valve.
3. Press and hold the power button for 2-3 seconds to turn on the device.
4. Use the mode button to select the appropriate inflation mode (car, motorcycle, bicycle, basketball, or custom).
5. Adjust pressure using the plus or minus keys.
6. Press the air pump start button to begin inflation.
7. Once finished, remove the pipe and retract it.

Lighting modes

Click the light switch to turn on the ring-mounted auxiliary light. Click again to cycle through constant modes, warning flash, and SOS rescue. To turn off, press and hold for about 1 second. If headlights are active, press and hold the LED button to switch between auxiliary lights and headlights.

Safety and maintenance

• Do not use for heavy-duty vehicles like trucks or vans.
• The air outlet becomes hot during use; avoid burns.
• Never connect the two battery clamps together.
• Charge the product at least every three months if not in regular use.
• Store in a cool, ventilated area away from direct sunlight.
• Do not disassemble the device.