User Manual for Green Lion 2-in-1 Nail Clipper & Polisher GL-NC2

Quick guide for Green Lion 2-in-1 Nail Clipper & Polisher GL-NC2. Learn how to trim, polish, clean, and charge your device safely.

Quick answers from the manual

Quick answer

To use the Green Lion 2-in-1 Nail Clipper & Polisher, open the dust cover, long press the trimming switch for 2 seconds to start, and use the switches to toggle between trimming and polishing modes. Always clean the dust bin after use. p. 3, 4, 5

Key actions

Turn on/off p. 4
Clean dust bin p. 5

First start

Charge fully before first use. p. 5

Problems and fixes

Device damaged

If the product is damaged due to collision or falling, please stop using it.

p. 7

Maintenance and reset

Clean the nail dust bin regularly with a small brush or dry paper towel. p. 5

Technical specifications

Parameter	Value	Meaning	Pages
Battery	450 mAh	Internal battery capacity	p. 3
Power	2W	Working power	p. 3

Where to find it in the PDF

Quick View p. 3
Usage Method p. 4
Operation Method p. 5

Table of contents

Quick Guide

The Green Lion 2-in-1 Nail Clipper & Polisher is a rechargeable device designed for trimming and polishing fingernails. Before first use, ensure the device is fully charged. To operate, use the dedicated switches for trimming and polishing heads. Always keep the device away from water and do not use it on damaged skin or wounds.

Product Overview

The device features a dust cover, a polishing head, a trimming tip with a floodlight, and a nail dust storage bin. It includes separate switches for the grinding head and the trimming head, along with a USB-C charging port.

Specifications

Material: ABS + Stainless Steel
Battery Capacity: 450 mAh
Charging Input: 5V - 300 mA
Working Power: 2W
Speed Modes: 2 (Trim & Polish)
Charging Interface: USB-C
Working Voltage: 3.7V
Noise Level: ≤48 dB
Dimensions: 88*66*34 mm
Weight: 200 g

Usage Instructions

Trimming

Open the dust cover.
Long press the trimming head switch for 2 seconds to turn on the device and the lamp.
The device defaults to gear 1. Click the switch to toggle to gear 2.
Place the nail into the opening of the knife tip and push slightly while moving the device slowly to ensure a rounded finish.
Long press the switch for 2 seconds to turn off the trimming head.

Polishing

After trimming, press the grinding head switch for 2 seconds to activate the polishing head.
Place the nail on the polishing head.
After polishing, press the switch for 2 seconds to turn off the machine.

Cleaning and Maintenance

Cleaning the Nail Dust Bin:

Turn off the device.
Press down one side of the nail bin cover slightly to open it.
Dump the nail dust and clean the bin with a small brush or dry paper towel.
Do not clean the bin while the machine is running.

Charging

Use the USB-C port to charge.
The indicator light is red during charging and turns green when fully charged.
Charge the device fully before the first use.
If not used for a long time, charge the device every three months.

Safety and Warnings

Do not use the device on wounds or damaged skin.
Keep away from water, fire, and high-temperature/humid environments.
Do not use gasoline, alcohol, or diluted cleaning agents; use a neutral cleaning agent.
Keep out of reach of children.
Do not disassemble or modify the device.
If the device is damaged due to dropping or collision, stop using it immediately.

Manufacturer information

Green Lion

Brand profile

Manufacturer website https://greenlion.ae/

Practical help

Common problems

Device does not turn on

Ensure the device is fully charged. If the battery is exhausted, charge it using the USB-C port.

Nail dust bin is full

Turn off the device, open the bin cover, and clean it with a small brush or dry paper towel.

Device damaged by water

Do not bathe or soak the product. If damaged by water, stop using it immediately.

Before use

Charge the device fully before the first use.
Ensure the nail area is free from wounds or infections.
Check that the dust cover is properly removed.
Ensure the device is clean and dry.

Specs in practice

Battery Capacity: 450 mAh, provides power for operation.
Charging Input: 5V - 300 mA, use a compatible USB-C charger.

Images and diagrams

The device has two main switches: one for the grinding head and one for the trimming head.
The charging port is located on the side of the device.
The nail dust storage bin is located under the cover.

Model compatibility

Designed for fingernails only.
Not suitable for polishing other parts of the body.

Show more Show less

Manual page author

David Miller

Documentation analyst

Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.