Hama 12W Dual USB-A Charger User Manual
Quick guide for the Hama 12W Dual USB-A Charger. Learn how to safely connect your devices, understand power limits, and maintain your charger for optimal performance.
Table of contents
Important Information
This charger is designed for charging electronic devices via USB. It supports a wide input voltage range (100-240V), making it suitable for worldwide use, provided you have the correct country-specific adapter. The total power output is limited to 12W.
Safety Instructions
- Environment: Use the product only in dry indoor rooms. Protect it from dirt, moisture, and overheating.
- Handling: Do not drop the product or expose it to major shocks. Do not modify the device, as this voids the warranty.
- Usage: Keep out of reach of children. Do not use near heaters, other heat sources, or in direct sunlight.
- Cables: Route cables to avoid tripping hazards. Do not bend or crush the cable. Always pull the plug, not the cable, when disconnecting.
- Damage: Do not use the product if it is visibly damaged or if the AC adapter/cable is damaged. Do not attempt to repair the device yourself; leave service work to qualified experts.
Operation
Before connecting your device, ensure it can be adequately supplied by the charger's current capacity and that the total power consumption does not exceed 12W. Follow these steps to charge your device:
- Connect your device to a USB charging socket using a suitable USB cable.
- Connect the charger to a properly installed and easily accessible mains socket.
- The charging process will be displayed on your device.
- Disconnect the device from the charger if you wish to interrupt the charging process or when the device is fully charged.
- Disconnect the charger from the mains connection after use.
When charging rechargeable batteries inside a device, observe the maximum charging times specified in your device's manual.
Care and Maintenance
Always disconnect the device from the mains before cleaning and during prolonged periods of non-use. Use only a dry, soft cloth for cleaning.
Technical Data
- Model Identifier: 00201951
- Input Voltage: 100 – 240 V
- Input AC Frequency: 50 / 60 Hz
- Output Voltage / Current / Power: 5.0V DC / 2.4A / 12.0W (Total)
- Average Efficiency: 80.0%
- Efficiency at Low Load (10%): 75.0%
- Power Consumption at Zero Load: 0.10 W
Disposal and Environmental Protection
Electronic devices and batteries must not be disposed of with household waste. Consumers are legally obligated to return these items to public collection points or retailers at the end of their service life. Personal data must be deleted before returning the item. The crossed-out dustbin symbol indicates that the product is subject to separate collection and recycling regulations.
Manufacturer information
Hama GmbH & Co KG
Practical help
Common problems
Ensure the charger is securely plugged into the wall socket and the USB cable is firmly connected to both the charger and the device.
Ensure the charger is used in a well-ventilated area and not covered. If it becomes excessively hot, disconnect it from the power source.
Before use
- Verify the device being charged is compatible with USB charging.
- Ensure the total power consumption of connected devices does not exceed 12W.
- Check that the wall socket is easily accessible.
- Inspect the charger and cable for any visible damage before use.
- Confirm you have the correct country-specific adapter if traveling.
Specs in practice
- Input Voltage (100-240V)
- Allows the charger to be used worldwide with appropriate country-specific plug adapters.
- Output Power (12W)
- The maximum combined power the charger can deliver to connected devices.
Model compatibility
- Suitable for devices requiring up to 12W total power.
- Requires a country-specific adapter for use in regions with different plug standards.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.