User Manual for Hama Micro USB 12W Charger Kit

Quick guide from the manual

To use the charger, connect your device to the USB charging socket using a suitable USB cable. Connect the charger to a properly installed and easily accessible mains socket. The charging process is displayed on your device. Disconnect the device from the charger if you wish to interrupt the charging process or when the device is fully charged. Then disconnect the charger from the line connection.

Safety instructions

• Protect the product from dirt, moisture, and overheating. Use only in dry rooms.
• Do not drop the product or expose it to major shocks.
• Do not modify the device in any way. Doing so voids the warranty.
• Keep out of reach of children.
• Do not use the product in the immediate vicinity of heaters or other heat sources.
• Do not use the product in areas where electronic products are not permitted.
• Do not open the device or continue to operate it if it becomes damaged.

Operation

The charger is suitable for mains voltages of 100-240V and can therefore be used worldwide. Please note that a country-specific adapter may be necessary. Before connecting a device, check whether it can be adequately supplied with the charger's current capacity. Ensure that the power of the connected device does not exceed 12W.

Care and maintenance

Only use soft, dry towels to clean the product. Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

Technical data

• Input voltage: 100-240V
• Input AC frequency: 50/60Hz
• Output voltage/current/power: 5.0V DC / 2.4A / 12.0W
• Average efficiency during operation: 82.4%
• Efficiency at low load (10%): 80.7%
• Power consumption at zero load: 0.07W