HiKOKI 14DSL Cordless Staple Gun
The HiKOKI 14DSL is a professional cordless staple gun designed for efficient fastening of moisture-permeable waterproofing sheets and heat insulation materials. It features a dual-mode firing mechanism (single-shot and continual-shot) and...
Table of contents
Product Description
The HiKOKI 14DSL is a high-performance cordless staple gun engineered for professional use in construction and renovation. It is specifically designed for securing moisture-permeable waterproofing sheets and heat insulation materials. The tool is compatible with 14.4V battery packs and features a robust magazine capacity of 150 staples.

Safety Precautions
Always wear eye protection when operating the tool to prevent injury from flying debris. Ensure the trigger is locked when not in use and always remove the battery before performing maintenance, clearing jams, or changing staples. Never point the staple outlet at yourself or others. The tool is not designed for fastening electrical cables, as this may damage insulation and cause electric shock or fire hazards.
Operation
The stapler offers two firing modes: Single-shot for precise placement and Continual-shot for repetitive fastening. The tool includes a safety mechanism that requires both the push lever and the trigger to be operated simultaneously to fire. Always check the push lever functionality before use. To load staples, press the stop lever, slide the magazine back, insert staples with prongs facing upward, and slide the magazine back into position until it locks.
Maintenance and Troubleshooting
Regularly inspect all mounting screws and ensure they are properly tightened. Keep the magazine clean by removing adhesive, fragments, and splinters that may accumulate. If the tool fails to fire, check the battery charge, ensure it is correctly attached, and verify that the trigger was not released halfway during operation. If the tool continues to malfunction, contact an authorized HiKOKI service center.
Disposal
Do not dispose of electric tools with household waste. In accordance with European Directive 2012/19/EU, electric tools must be collected separately and returned to an environmentally compatible recycling facility.
Related manuals
Related manuals from the same brand or category.