User Guide for Home Accents Holiday 12ft GIANT-SIZED MOTION LED Pre-Lit Cone Tree with Star

Quick guide from the manual

This document provides instructions for the assembly, operation, and maintenance of the 12ft GIANT-SIZED MOTION LED Pre-Lit Cone Tree. Ensure all parts are present before assembly. For assistance, contact customer service at 1-855-434-6543.

Assembly

1. Preparing the Tree: Remove the collapsed tree (A) from packaging and ensure the plastic head is at the top of the pole.
2. Connecting Lights: Connect the upper tree light connector (2) to the star topper connector (C).
3. Attaching the Star Topper: Place the star (C) on top of the tree pole (A).
4. Attaching the Power Adapter: Connect the bottom tree light connector (3) to the power adapter (D).
5. Setting up the Tree: Untie the light bundle and pull the telescopic pole (A) upward until it clicks four times and is fully extended.
6. Securing the Tree Base: Press the base down until flat, tighten the screw (5) at the bottom, and use ground stakes (E) to secure the tree.
7. Lighting the Tree: Plug the power adapter (D) into an outlet and use the controller box or remote control (F) to select lighting settings.

Remote Control Operations

Before first use, pull out the plastic insulation tab from the remote control. The remote must be aimed at the controller box within a 6-meter range.

• ON/OFF: Turns the lights on or off.
• 4H/6H/8H: Sets the timer for 4, 6, or 8 hours of operation.
• Demo: Cycles through all 9 lighting functions.
• Lighting Modes: Includes steady, slow twinkle, and fast twinkle options in warm white (WW), multi-color (MLT), or a combination (WW/M).

Battery Replacement

The remote uses a CR2025 3V button battery. To replace it, push the movable block on the side of the battery slot, pull the slot out, replace the battery, and slide it back in. Keep batteries out of reach of children.

Safety and Maintenance

This product is for indoor and outdoor use. Always unplug the device when leaving the house or retiring for the night. Do not attempt to replace lamps or modify the string. When not in use, disassemble and store in a cool, dry location protected from sunlight.