Garden / Seasonal Decorations
User Manual for Home Accents Holiday 1000W Fog Machine
Quick guide for the Home Accents Holiday 1000W Fog Machine (FM1000-AH). Includes setup, operation, cleaning, storage, and fuse replacement instructions.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This fog machine is designed for indoor use only. It requires a 3-5 minute preheat time before it can produce fog. Always use SVI Fog Liquid; using other liquids may cause damage, blockage, or leakage. Ensure the unit is placed on a flat, level, hard surface and connected to a properly grounded outlet.
Parts List
- Fog Machine
- Remote
- Power Cable
- Handle
- Handle Screws (2 pieces)
General Assembly and Operation
- Remove all packing materials. Check for broken or missing parts.
- Secure the handle to the unit using the provided handle screws.
- Plug the remote connector into the 3-pin connector on the back of the machine.
- Unscrew the reservoir tank lid and fill with SVI Fog Liquid. Do not overfill. If liquid spills on the unit, let it dry completely before plugging in.
- Connect the unit to a 120VAC power supply and turn on the switch located on the back of the unit.
- Wait 3-5 minutes for the unit to heat up. When the remote light turns on, use the remote switch to produce fog.
Maintenance and Cleaning
If you experience low fog output after continuous use or storage, run a cleaning solution through the system to clear the heating element.
- Cleaning Procedure: Unplug the unit and let it cool. Empty all fog liquid. Replace with a fog machine cleaning solution (SVI Fog Machine Cleaning Fluid recommended). Plug in, allow to warm up, and run the unit in a well-ventilated area until the tank is empty.
- Inspection: Before each use, check the enclosure, remote, cords, and plugs for cracks or exposed wires.
Storage
To store the unit for an extended period:
- Unplug and let the unit cool. Empty all fog liquid.
- Plug in and run the unit for 10 seconds to ensure the tank is empty and dry.
- Store on a flat, level surface in a cool, dry, and well-ventilated location.
- For best performance, operate the unit for 10 minutes every 3 months.
Fuse Replacement
If the unit does not function when connected to power, the fuse may be blown.
- Disconnect from the power supply.
- Turn the fuse knob counterclockwise to reveal the fuse.
- Replace with a new fuse of the same size and type: 10A, 125V.
- Reinstall the cover by turning clockwise. Do not over-tighten.
Manufacturer information
Home Accents Holiday
Practical help
Common problems
Low fog output
Run a cleaning solution through the system to prevent particle accumulation in the heating element.
Unit does not function
Check if the fuse has blown. Replace with a 10A, 125V fuse if necessary.
Condensation on nozzle
This is normal operation.
Unit stops producing fog during use
The unit is reheating. Wait for the remote light to turn on again.
Before use
- Check for broken or missing parts.
- Place on a flat, level, hard surface.
- Ensure the unit is dry.
- Use only SVI Fog Liquid.
- Connect to a properly grounded outlet.
- Ensure there is enough fog liquid in the tank.
Specs in practice
- Preheat Time
- 3-5 minutes required before the unit is ready to produce fog.
- Tank Capacity
- 1.1 Liters.
Images and diagrams
- Illustration 1: Shows the attachment of the handle to the fog machine using the handle screws.
- Illustration 2: Shows the location of the reservoir tank lid for filling the fog liquid.
Model compatibility
- Use only SVI Fog Liquid.
- For indoor use only.
- Do not use for space heating purposes.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.