User Manual for Home Accents Holiday 23LE11055 LED Pumpkin Disc Light

Quick Guide

The Home Accents Holiday LED Pumpkin Disc Light is a battery-operated decorative light. It features 16 colors, multiple timer settings, and is controlled via an included RF remote. It can be mounted using integrated magnets or suction cups.

Battery Installation

Light Unit: Install 3 x AA batteries (alkaline recommended). Ensure correct polarity.

Remote Control: Remove the plastic protector from the bottom of the remote before use. Install 1 x CR2025 button cell battery by aligning the (+/-) markings.

Operation

Remote Control

The RF remote allows you to control the light settings:

• Timer Options: 2H (2 hours ON, 22 hours OFF), 4H (4 hours ON, 20 hours OFF), 6H (6 hours ON, 18 hours OFF).
• Brightness: Adjust using the brightness +/- buttons.
• Modes: Select between Flash, Fade, and Smooth functions.
• Colors: Choose from 16 colors.

Timer Settings

To set a timer, press the corresponding button (2H, 4H, or 6H). The light will cycle automatically every 24 hours until the "Timer OFF" button is pressed.

Mounting

• Suction Cups: Use on flat, smooth surfaces. Clean the surface thoroughly before installation to ensure a secure hold.
• Magnets: Can be used on any ferromagnetic metal (steel or iron). The magnet strength is 5000 Gauss.

Maintenance and Safety

Closing the Light Disc: Do not remove the seal rings. Ensure the seal rings are in the correct position. Tighten the two halves by holding the base and turning the top clockwise until tight.

Important Safety Notes:

• This product is for seasonal use (90 days max).
• Keep the remote control away from water; it is not waterproof.
• Do not mix old and new batteries or different types of batteries.
• Remove batteries if the product will not be used for long periods.
• Avoid looking directly at the bulb when starting.
• This is not a toy; keep out of reach of children.