Plumbing / Showers & Tubs
User Manual for Home Depot 1-Light Pendant Lamp
Quick guide for the Home Depot 1-Light Pendant Lamp. Includes installation steps, wiring instructions, bulb requirements, and maintenance tips.
Table of contents
Manual images
Click an image to enlargeQuick Guide and Safety Information
This pendant lamp is designed for indoor use in dry locations only. It must be installed on a ceiling mount and connected to a 3-wire, single-phase electrical supply system with a proper ground wire. Always turn off the main power at the circuit breaker before beginning installation to prevent electrical shock. If you lack experience with electrical wiring, contact a qualified licensed electrician.
Bulb Requirements
- Base Type: E26 (medium) base.
- Maximum Wattage: Do not exceed 60W for incandescent bulbs, 9W for LED bulbs, 13W for fluorescent (CFL) bulbs, or 9W for self-ballasted LED bulbs.
Installation Instructions
- Preparation: Remove the fixture and mounting package from the box. Do not discard any packaging until assembly is complete to avoid losing small parts.
- Wiring: Feed the wires through the mounting plate (A). Connect the wires securely using wire connectors:
- White wire to White wire.
- Black wire to Black wire.
- Green/Copper wire to Green/Copper wire.
- Mounting: Secure the mounting plate to the ceiling using the provided screws.
- Adjustment: Determine the desired length of the lamp cord and secure it using the small screw and a screwdriver.
- Shade Installation: Carefully install the lamp shade as shown in the diagram.
- Bulb Installation: Install the specified light bulb according to the maximum wattage recommendations.
Care and Maintenance
To maintain the fixture, always turn off the light and allow the bulb to cool before cleaning. Wipe the fixture clean with a soft, dry cloth or static duster. Avoid using harsh chemicals or abrasive cleaners, as these may damage the finish of the fixture.
Manufacturer information
The Home Depot
Practical help
Common problems
Fixture does not light up
Ensure the circuit breaker is on and the bulb is properly installed and compatible with the E26 base.
Bulb overheating
Verify that the bulb wattage does not exceed the maximum specified limits (60W incandescent, 9W LED, etc.).
Before use
- Turn off the main power at the circuit breaker.
- Verify you have a 3-wire, single-phase electrical supply system.
- Ensure you have an E26 (medium) base bulb.
- Check that all parts are present before discarding packaging.
- Ensure the installation location is indoors and dry.
Specs in practice
- E26 (medium) base
- The standard screw-in base size required for the light bulb.
- Max 60W Incandescent
- The maximum power limit for incandescent bulbs to prevent fire hazards.
Images and diagrams
- The wiring diagram illustrates the correct connection of white, black, and ground (green/copper) wires using wire connectors.
- The cord adjustment diagram shows how to secure the lamp cord length using the small screw.
Model compatibility
- Indoor use only.
- Dry locations only.
- Ceiling mount only.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.