Assembly Instructions for Homestyles 10-FB80 Chair and 08-FB80 Ottoman

Quick guide from the manual

This document provides assembly instructions for the Homestyles 10-FB80 Chair and 08-FB80 Ottoman. Important: Do not use power tools above 8 volts to assemble the furniture, as this may cause cracking. Always assemble parts on a soft cloth to prevent scratches. If parts are missing or damaged, contact Homestyles customer service at 888-680-7460 or visit www.homestylesfurniture.com.

Parts List

Chair (10-FB80):

• A. Base (1 pc.)
• B. Foot (4 pcs.)
• C. Back Cushion (1 pc.)

Ottoman (08-FB80):

• A. Base (1 pc.)
• B. Foot (4 pcs.)

Assembly Instructions for Chair

1. Step 1: Open the zipper at the bottom of the Base (A) to remove the Feet (B). Close the zipper after removal.
2. Step 2: Attach the four Feet (B) to the Base (A) and tighten them securely.
3. Step 3: Turn the unit to its upright position. Rotate the back into position and lock it using the latches. Attach the back cover to the back of the unit.
4. Step 4: Place the Back Cushion (C) into position.

Assembly Instructions for Ottoman

1. Step 1: Open the zipper at the bottom of the Base (A) to remove the Feet (B). Close the zipper after removal.
2. Step 2: Attach the four Feet (B) to the Base (A) and tighten them securely.
3. Step 3: Turn the unit over to its upright position.

Care Instructions

To maintain the finish and integrity of your furniture, follow these guidelines:

• Liquids: Do not allow liquids to remain on the furniture; absorption causes warping, splitting, and delamination.
• Cleaning: Clean with a soft cloth moistened in lukewarm soap and water. Buff with a dry clean cloth.
• Prohibited items: Do not use glass cleaners (ammonia attacks the finish), rubber-based placemats (causes discoloring), or commercial waxes and polishes (causes yellowing).
• Surface protection: Do not place hot objects on the surface, do not write directly on the surface, and avoid direct sunlight to prevent fading.