Assembly instructions for IKEA RÅDMANSÖ chest

Important Safety Information

This product is a delicate table. Please observe the following safety precautions:

• Do not sit on the product.
• Do not place heavy objects on this product.
• Maximum load: 25 kg (55 lb).

Tools Required

To assemble this furniture, you will need the following tools:

• Flathead screwdriver
• Crosshead screwdriver
• Spirit level

Assembly Instructions

Follow the step-by-step diagrams provided in the manual. It is recommended to assemble the unit on a soft surface, such as a rug or carpet, to prevent scratching or damaging the panels.

Preparation

Check all parts against the inventory list on page 4. Ensure you have all the necessary screws, dowels, and fittings before starting.

Assembly Steps

1. Runners: Attach the drawer runners (CL and CR) to the side panels using the provided screws.
2. Frame Assembly: Connect the side panels and structural supports using the dowels and cam locks. Ensure the panels are oriented correctly as shown in the diagrams.
3. Legs: Attach the legs to the frame structure.
4. Drawer Assembly: Assemble the drawer box by connecting the sides and back, then attach the drawer front.
5. Final Steps: Insert the drawer into the main unit and ensure it slides smoothly.

Maintenance

Periodically check that all screws and cam locks are tightened. If the drawer does not slide correctly, verify that the runners are installed on the correct sides and are properly aligned.