Installation Guide for Belleze 014-HG-41303 LED Nightstand

Quick guide from the manual

The Belleze 014-HG-41303 LED Nightstand requires approximately 120 minutes to assemble and should be built by two people. Ensure you have a clear, flat surface (carpet or rug recommended) to prevent scratches. The unit has a maximum load capacity of 70 lb for the top panel and 20 lb per drawer. Always secure the furniture to the wall using the provided anti-tipping strap to prevent serious injury.

Package contents and assembly

Before beginning, lay out all components and hardware to ensure nothing is missing. The assembly process involves 34 steps, primarily using cam bolts, cam locks, wood dowels, and screws. Key assembly stages include:

• Preparation: Attach cam bolts to panels as indicated in the early steps.
• Main Structure: Assemble the upper support and base assemblies before connecting them to the side panels.
• Drawers: Assemble the drawer boxes, attach the sliders, and install the handles.
• Final Assembly: Secure the back panels and attach the anti-tipping strap to the wall.

Hand-tighten all hardware to avoid damaging the MDF material. Tighten all bolts and screws again within the first 2 weeks of use.

Remote control operation

The nightstand features integrated LED lighting controlled by a remote. One table contains the main control receiver, and the other contains a sub-receiver; only one remote is needed to operate both in sync. Functions include:

• ON/OFF: Power the lights on or off.
• Brightness: Use the Increase/Decrease buttons to adjust brightness in static mode or effect speed in light effect mode.
• Static Color: Select specific colors using the shortcut buttons.
• Light Effects: Use Flash 7/16 or Strobe 7/16 to enable spectrum cycle or color breathing modes.

Safety and maintenance

To ensure the longevity of your furniture, follow these care guidelines:

• Cleaning: Use a lightly dampened cloth with a small amount of mild soap if necessary. Dry immediately. Do not use bleach or alcohol.
• Maintenance: Check the tightness of all bolts every 2 months and tighten if necessary.
• Warnings: Do not climb or step on the product. Keep small components, plastic bags, and packaging film away from pets and children to avoid choking or suffocation hazards.