findmanualpdf.com

Oypla 3349 and 3561 Hot Plate

Quick guide for the Oypla 3349 and 3561 hot plates. Learn how to condition the protective coating, use temperature settings, and maintain your appliance safely.

Quick answers from the manual

Quick answer

  • Before first use, condition the protective coating by turning the hot plate to the highest setting for 3-5 minutes. Use utensils with solid, flat bases (18-20cm for 1.5kW plate; 15-17cm for 2.5kW smaller plate). p. 3

Key actions

  • Condition the coating p. 3
  • Adjust temperature p. 3

First start

  • Turn the hot plate on the highest setting for 3-5 minutes to condition the protective coating. p. 3
Show 4 more answers Show less

Problems and fixes

Damaged cord or plug

Do not operate the product.

p. 2

Maintenance and reset

  • Clean the painted surface with a damp soft cloth and mild household cleaning powder. Wait for the unit to cool down before cleaning. p. 2

Technical specifications

Parameter Value Meaning Pages
1.5kW Hot Plate Utensil Size 18-20cm Recommended diameter for solid base utensils p. 3
2.5kW Hot Plate (smaller) Utensil Size 15-17cm Recommended diameter for solid base utensils p. 3

Where to find it in the PDF

  • Safety Instructions p. 2
  • Operating Instructions p. 3
Table of contents

Quick guide from the manual

Before using your hot plate for the first time, you must condition the protective coating. Turn the hot plate on to the highest setting for 3-5 minutes. Ensure you use cooking utensils with a solid base for the most efficient operation.

Single hot plate model
Single hot plate model

Safety instructions

  • Close supervision is required when the product is used by or near children.
  • Do not operate the appliance if the cord or plug is damaged or if the product malfunctions.
  • Do not immerse the product or cord in water or any liquid.
  • Never operate the appliance in the immediate vicinity of water sources.
  • Always switch off and unplug the appliance when not in use and before cleaning.
  • Do not touch the surfaces or the hot plate while it is in operation.
  • Do not leave the product unattended when switched on.
  • Ensure the power supply matches the rating label on the appliance and that the socket is earthed.
  • This product is for domestic use only.

Operating instructions

Turn the controls to the recommended position to achieve the desired temperature:

  • 1: For simmering of delicate foods and thickening sauces.
  • 2: Slow cooking.
  • 3: For simmering large quantities.
  • 4: Shallow frying of meal and pan dishes.
  • 5: To bring all dishes to rapid heat.
  • 6: To bring all dishes to a boil.

The indicator light will turn off when the hot plate reaches the selected temperature and will cycle on and off to maintain it.

Utensil requirements

  • 1.5kW hot plate: Use utensils with a solid base, diameter of approx. 18-20cm, and a maximum capacity of 1.5L.
  • 2.5kW hot plate: For the smaller plate, use utensils with a diameter of approx. 15-17cm.
  • Do not use utensils with convex, concave, or uneven bottoms.

Maintenance and cleaning

Wait for the hot plate to cool down completely before cleaning. Clean the painted surface with a damp soft cloth and mild household cleaning powder. The circular hot plate can be cleaned with household cleaning powder.

Environmental protection

This product is subject to WEEE regulations. Do not dispose of it with general household waste. Take the product to a designated collection point for proper treatment, recovery, and recycling.

Practical help

Common problems

Appliance not working or damaged

Do not operate if the cord or plug is damaged or if the product malfunctions. Contact customer service at [email protected].

Uneven cooking or inefficient heating

Ensure you are using utensils with a solid, flat base. Avoid convex, concave, or uneven bottoms.

Before use

  • Check that you have all parts and fittings from the packaging.
  • Ensure the power supply is earthed and matches the rating label.
  • Condition the protective coating by turning the hot plate to the highest setting for 3-5 minutes before first use.
Show more Show less

Specs in practice

1.5kW Hot Plate
Recommended utensil base diameter: 18-20cm; Maximum capacity: 1.5L.
2.5kW Hot Plate (smaller plate)
Recommended utensil base diameter: 15-17cm.

Model compatibility

  • For domestic use only.
  • Requires an earthed power socket.

Manual page author

David Miller

Documentation analyst

Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.