Lighting / Fixtures
Philips MASTER Value LEDtube T8 13.5W865 User Guide
Quick guide for the Philips MASTER Value LEDtube T8 13.5W865. Includes technical specifications, installation compatibility, operating conditions, and performance data.
Table of contents
Quick guide from the manual
The Philips MASTER Value LEDtube T8 13.5W865 is a high-performance LED solution designed to replace traditional T8 fluorescent lamps. It is compatible with EM ballasts or can be installed directly on the mains. This guide provides essential technical data for professional lighting applications in office, industry, retail, and hospitality environments.
Device description
The product is a 1200mm frosted LED tube with a G13 cap-base. It is designed for energy efficiency, offering instant light and a long nominal lifetime of 60,000 hours.
Installation and compatibility
The LED tube is designed for fast installation. It supports replacement of T8 fluorescent lamps using existing EM ballasts or direct mains connection. Ensure the installation environment meets the ambient temperature range of -20 to +45 °C.
Operating and electrical parameters
- Voltage: 220-240 V
- Power Consumption: 13.5 W (equivalent to 36 W fluorescent)
- Frequency: 50 to 60 Hz
- Starting Time: 0.5 seconds
- Dimmable: No
Technical specifications
- Color Temperature: 6500 K (Cool Daylight)
- Luminous Flux: 2,100 lm
- Beam Angle: 240 degrees
- CRI: 83
- Photobiological Safety: RG0 (EN 62471)
Safety and maintenance
The product is RoHS compliant and holds the KEMA Keur certificate. The maximum T-Case temperature is 55 °C. The tube is not dimmable. For further information, visit www.lighting.philips.com.
Official resources from the manual
Manufacturer information
Philips
Practical help
Common problems
Light does not turn on or flickers
Ensure the tube is properly seated in the G13 socket and that the EM ballast or mains connection is functioning correctly.
Dimming not working
This model is not dimmable. Do not connect to a dimmer switch.
Before use
- Verify the existing fixture uses a G13 base.
- Check that the supply voltage is between 220-240 V.
- Ensure the ambient temperature is within -20 to +45 °C.
- Confirm the application does not require dimming functionality.
Images and diagrams
- The dimensional drawing shows the total length (A3) is 1212.4 mm, with the tube body (A1) being 1198.2 mm.
- The light distribution diagram illustrates a 240-degree beam angle.
Model compatibility
- Compatible with EM ballast systems.
- Suitable for direct mains installation.
- Not compatible with dimming circuits.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.