Tools / Power Tools
Ronix 2510 Electric Screwdriver 10mm User Manual
User manual for the Ronix 2510 10mm electric screwdriver, covering technical specifications, safety instructions, assembly, and operating procedures.
Table of contents
Product Overview
The Ronix 2510 is a 10mm electric screwdriver designed for drilling and driving screws. It features a 230W motor, variable speed control, and an automatic chuck for easy bit changes. The tool is equipped with a run-on brake for precision and a lock button for continuous operation.
Technical Specifications
- Power: 230W
- Voltage: 220-240V, 50-60Hz
- Max Torque: 25 N.m
- No-load Speed: 0-480 RPM / 0-1800 RPM
- Max Capacity (Wood): 25mm
- Max Capacity (Steel): 10mm
- Weight: 1.62kg
Safety Instructions
Always wear appropriate personal protective equipment, including eye and ear protection. Ensure the work area is clean and well-lit. Do not operate the tool in explosive atmospheres. Keep the tool away from moisture and never abuse the power cord. If working outdoors, use an extension cord rated for outdoor use (marked W-A or W) and a residual current device (RCD).
Operation and Maintenance
The rotational direction can be reversed using the F/R lever. Torque settings can be adjusted in 18+1 steps. To change a tool, ensure the rotational direction switch is in the center position to lock the spindle. Never cover the air vents, as they are essential for motor cooling. If the tool produces excessive vibration or defects, stop immediately and have it serviced by a qualified professional using identical replacement parts.
Dust and Chip Extraction
Dust from certain materials (e.g., lead-containing coatings, specific woods) can be hazardous. Ensure good ventilation and wear a P2 filter-class respirator when working with materials that generate harmful dust.
Manufacturer information
Ronix Tools
Practical help
Common problems
Tool does not start or switch is unresponsive
Check if the switch is damaged; if it does not turn on/off, the tool must be repaired by a qualified service center.
Excessive vibration during operation
Stop the tool immediately, check for defects or loose assemblies, and have it repaired.
Chuck is difficult to loosen
Clamp a hex key into the chuck and give the long end a light blow to loosen it.
Before use
- Ensure the rotational direction switch is in the center position before changing bits.
- Verify that the power supply matches the tool's voltage requirements (220-240V).
- Check that the work area is clear of flammable materials.
- Ensure the switch is in the OFF position before plugging in the tool.
- Run the tool for 30 seconds in a safe position to check for abnormal vibrations.
Specs in practice
- Max Torque 25N.m
- The maximum rotational force the tool can apply, adjustable via the clutch cap.
- No-load Speed
- The rotational speed range (0-480 / 0-1800 RPM) controlled by the trigger pressure.
- Securing Screw
- A screw inside the chuck with a left-hand thread; must be removed before taking off the chuck.
Model compatibility
- Use only perfectly sharpened HSS drill bits for metal.
- For hard materials, predrill a pilot hole to approximately 2/3 of the screw length.
- The tool produces an electromagnetic field; consult a physician if you have medical implants.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.