Home Appliances / Vacuum Cleaners
User Manual for Rowenta X-PERT 3.60 Stick Vacuum Cleaner
Quick guide for the Rowenta X-PERT 3.60 stick vacuum cleaner. Learn about assembly, charging, maintenance, filter cleaning, and safety precautions.
PDF source: Français · summary: English
Quick answers from the manual
Quick answer
- The Rowenta X-PERT 3.60 is a cordless stick vacuum. It requires 5 hours to charge and offers up to 45 minutes of runtime in handheld mode. p. 1
Key actions
- Charge the vacuum p. 1
- Clean the filter p. 2
First start
- Charge the battery for 5 hours before the first use. p. 1
Show 4 more answers Show less
Problems and fixes
Reduced suction power
Empty the dust container and clean the filter.
p. 2Maintenance and reset
- Clean the filter regularly (3a, 3b, 3c) and the brush head (4). p. 2
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Charging time | 5 hours | Time to fully charge the battery | p. 1 |
| Handheld runtime (Min) | 45 min | Runtime in minimum power mode | p. 1 |
| Handheld runtime (Max) | 18 min | Runtime in maximum power mode | p. 1 |
| Handstick runtime (Min) | 40 min | Runtime in minimum power mode | p. 1 |
| Handstick runtime (Max) | 17 min | Runtime in maximum power mode | p. 1 |
Where to find it in the PDF
- Assembly and Charging p. 1
- Maintenance and Safety p. 2
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The Rowenta X-PERT 3.60 is a cordless stick vacuum cleaner. It requires 5 hours for a full charge. The device offers different runtimes depending on the mode and configuration (handheld vs. handstick). Always ensure the battery is fully charged before first use.
Assembly
The vacuum is designed for easy assembly. Click the components together as shown in the assembly diagram. Ensure all parts are securely locked in place before operation.
Charging and Runtime
The device requires 5 hours to reach a full charge. Runtime varies based on the usage mode:
- Handheld (Min mode): 45 minutes
- Handheld (Max mode): 18 minutes
- Handstick (Min mode): 40 minutes
- Handstick (Max mode): 17 minutes
Maintenance and Cleaning
Regular maintenance is essential for optimal performance:
- Dust Container: Empty the dust container regularly.
- Filter Cleaning: Follow the steps 3a, 3b, and 3c to clean the filter. Ensure the filter is completely dry before reinserting it.
- Brush Maintenance: Check the brush head for hair or debris and clean it as shown in step 4.
- Battery Disposal: When the battery reaches the end of its life, dispose of it according to local regulations (step 5).
Safety Instructions
Observe the following safety precautions:
- Do not use the vacuum on wet surfaces.
- Do not vacuum liquids.
- Do not vacuum hot ash, embers, or sharp objects.
- Do not use the device near heat sources.
- Keep the device away from children and pets.
Practical help
Common problems
Vacuum not picking up dirt
Check if the dust container is full or if the filter is clogged. Clean the filter and empty the container.
Short runtime
Ensure the battery is fully charged (5 hours). Check if the brush is obstructed.
Before use
- Ensure the battery is fully charged (5 hours).
- Check that the dust container is empty.
- Ensure the filter is clean and dry.
- Check for obstructions in the brush head.
Show more Show less
Specs in practice
- Charging time
- 5 hours for a full charge.
- Handheld runtime (Min)
- 45 minutes of operation.
- Handheld runtime (Max)
- 18 minutes of operation.
- Handstick runtime (Min)
- 40 minutes of operation.
- Handstick runtime (Max)
- 17 minutes of operation.
Images and diagrams
- 1a: Assembly steps.
- 1b: Runtime and charging indicators.
- 2: Emptying the dust container.
- 3a/3b/3c: Filter maintenance.
- 4: Brush maintenance.
Model compatibility
- Runtime varies by model configuration.
- Accessories may vary depending on the specific model.
Manual page author
Michael Turner
Technical manual editor