Sandberg UV Sterilizer Wireless 10W USB

Quick guide from the manual

This device combines a UV sterilizer with a 10W wireless charger and an aromatherapy function. It requires a USB-A power adapter (minimum 5V/2A or 9V/2A) to operate. Always ensure the lid is closed firmly before starting the UV cycle, as a magnetic switch will automatically shut off the UV light if the lid is opened during operation.

Safety Warnings

• Avoid looking directly at the UV light; it can be harmful to eyes and skin.
• Keep the product away from children.
• Keep the device away from water, moisture, fire, and heat sources.
• Do not clean the device using organic chemicals.
• Always close the lid firmly before pressing start.

Connection

Connect the device to a power source using the provided USB-C cable. The other end of the cable must be connected to a USB-A charger that provides at least 5V/2A or 9V/2A.

Wireless Charger Function

The top of the device acts as a wireless charger. This function requires a device that is Qi-compatible. Simply place your Qi-compatible smartphone or device on top of the closed lid to begin charging.

UV Function

To disinfect items:

1. Open the lid and place the items (e.g., phone, watch, glasses, jewelry) inside the box.
2. Close the lid firmly.
3. Press the button on the lid to select the mode:
   • Quick (1 minute duration): Press the button 1 short click.
   • Deep clean (5 minutes duration): Press the button 2 short clicks.
4. The device is ready for opening when the red light stops.

Aromatherapy Function

You can add a pleasant scent while sterilizing:

1. Add a few drops of your favorite fragrance to the designated aroma holes inside the device.
2. The aromatherapy function operates automatically while the UV sterilization process is running.

Warranty

The product comes with a five-year warranty. Please register your new Sandberg product at www.sandberg.it/warranty. For support, visit http://helpdesk.sandberg.it. For information on handling electronic waste, see www.sandberg.it/weee.