General / Other Manuals
Scheppach Compact 12T / 15T Log Splitter User Guide
Quick guide for the Scheppach Compact 12T and 15T log splitters, covering assembly, operation, safety, maintenance, and troubleshooting.
Table of contents
Quick guide from the manual
This document provides essential information for the safe and efficient operation of the Scheppach Compact 12T and 15T log splitters. It includes assembly instructions, safety precautions, maintenance schedules, and troubleshooting steps. Always read the full manual before operating the machine.
Device description
The log splitter features a splitting column, a riving knife, and a two-hand control system for safety. It is equipped with a trunk lifter for easier handling of heavy logs and a swivel table for different log lengths.
Assembly and setup
The machine is delivered partially assembled. Follow the instructions in the manual to mount the control arms, wheels, support wheel, hoop guards, chain hooks, and the trunk lifter. Ensure the machine is placed on a level, stable surface before operation.
Operation
The log splitter is designed for vertical operation only. Place the log on the base plate, hold it with the retaining claws, and operate the control levers with both hands. If a log is not split in one stroke, use the swivel table to perform a second stroke.
Safety
The machine must be operated by one person only. Wear appropriate protective equipment, including safety goggles, work gloves, hearing protection, and safety shoes. Keep a 5-meter safety radius around the machine. Never remove jammed logs by hand while the machine is running.
Maintenance
Regular maintenance is crucial for safety and performance. Clean the machine after each use, keep the splitting blade guides clean, and lubricate slide rails. Check the hydraulic oil level regularly and perform the first oil change after 50 operating hours, followed by every 500 hours.
Troubleshooting
If the hydraulic pump does not start, check the power supply or reset the motor's thermal switch. If the column does not move downwards, check the oil level, ensure levers are connected, or clean the rails. If the motor runs but the column does not move, check the motor's rotation direction.
Manufacturer information
Scheppach
Practical help
Common problems
Hydraulic pump does not start
Check power supply or reset the motor's thermal switch inside the motor housing.
Column does not move downwards
Check oil level, ensure levers are properly connected, or clean the rails.
Motor runs but column does not move
Check and correct the motor's rotation direction.
Before use
- Check connection cables for defects (cracks, cuts).
- Inspect the machine for any damage.
- Ensure all screws are tightened.
- Check the hydraulic system for leaks.
- Verify the oil level.
- Perform a functional check of the two-hand control.
Specs in practice
- Max. splitting force
- 12t (Compact 12T) or 15t (Compact 15T), depending on log resistance.
- Operating mode
- S6/40% (intermittent periodic duty).
- Hydraulic oil quantity
- 8.0 liters.
Model compatibility
- Only use original parts and accessories from the manufacturer.
- Designed for vertical operation only.
- Suitable for logs with length 75-107 cm and diameter 9-40 cm.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.