General / Accessories
1.2/2.4KW Ceramic Heater with Telescopic Tripod Stand - 110V
A high-performance 1.2/2.4KW ceramic heater featuring a telescopic tripod stand, adjustable thermostat, and programmable 7-day timer for efficient indoor heating.
Table of contents
Manual images
Jump to the sectionProduct Overview
The Sealey CH30110VS is a robust, tripod-mounted ceramic heater designed for efficient indoor heating. It features a powder-coated metal construction and two ceramic heating elements that provide instant heat. The unit is equipped with an adjustable thermostat (15°C – 45°C) and a soft-touch control panel with an integrated LED display, allowing for precise temperature management.
Safety and Operation
Safety is paramount when operating this heater. It includes a built-in tilt-cutout switch that automatically shuts off the unit if it is tilted beyond 25 degrees in any direction. Users must ensure the heater is placed on a stable, horizontal surface at least 2 meters away from flammable materials, curtains, or furniture. The unit is intended for indoor use only and must never be covered or used in the immediate vicinity of water sources like baths or swimming pools.
Before operation, ensure the heater is connected to a compatible 110V power supply. The device features a 7-day programmable timer, allowing users to set specific working time modes for each day of the week. An open window detection function is also included, which automatically powers off the heater if the ambient temperature drops by more than 5°C within 10 minutes.
Maintenance and Care
To maintain optimal performance, keep the heater clean and free of dust. Always disconnect the unit from the power supply and allow it to cool completely before performing any maintenance. The reflector can be cleaned with a soft, dry cloth; avoid using abrasive cleaners or solvents that could damage the surface. If an element needs replacement, ensure the unit is unplugged and handle the ceramic components with care, using a soft cloth to avoid direct skin contact with the glass. The power cord and internal wiring should only be serviced or replaced by a qualified electrician.
Storage and Disposal
When not in use, store the heater in a cool, dry, and childproof location. At the end of its service life, the product must be disposed of in accordance with WEEE regulations. Please ensure all components are sorted and taken to an authorized recycling center to minimize environmental impact.
Manufacturer information
Sealey Group
Practical help
Common problems
Heater does not turn on after being knocked over
The tilt switch has activated. Return the unit to a vertical position and perform a manual restart.
Heater powers off automatically
Check if the open window detection has triggered due to a rapid temperature drop, or if the set temperature has been reached.
Fuse blows or supply trips
Ensure the supply rating is correct for the appliance. If tripping persists, consult a qualified electrician.
Before use
- Inspect power supply leads, plugs, and connections for wear or damage.
- Ensure the heater is on a horizontal and stable surface.
- Verify a minimum 2m clearance from flammable materials.
- Check that the grille is properly fitted.
- Ensure the voltage rating matches your power supply.
- Confirm the unit is not located directly below an electrical socket.
Images and diagrams
- Fig 1: Shows the telescopic tripod stand and the plunger mechanism for height adjustment.
- Fig 2: Illustrates the assembly of the heater swivel bracket using the M8 screw, washer, and nut.
- Fig 3: Displays the power rocker switch and the control panel interface.
Model compatibility
- Designed for indoor use only.
- Requires a 32A/110V plug (EN 60309 standard).
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.