Seeed Studio reComputer 16GB Edge AI Device

Product Overview

The Seeed Studio reComputer 16GB is a high-performance Edge AI device designed exclusively for indoor use. It is a precision electronic component that requires careful handling to avoid damage from impacts, moisture, or extreme environmental conditions.

Safety Instructions

To ensure safe operation and maintain the warranty, please observe the following:

• Keep the device away from children and pets.
• Do not modify or attempt to repair the device yourself.
• Protect the unit from mechanical stress, direct sunlight, flammable gases, and solvents.
• If the device shows visible damage, fails to function correctly, or has been stored under poor conditions, discontinue use immediately and consult a professional.

Power Supply and Operation

The device must only be operated using the supplied power adapter. Before connecting, verify that your local mains voltage matches the adapter specifications. Always connect to an easily accessible wall socket. Never handle the power adapter with wet hands or pull the cable to disconnect it. During thunderstorms, disconnect the power supply for safety. Ensure cables are routed to prevent tripping hazards and are not pinched or damaged by sharp edges.

Maintenance and Troubleshooting

Maintenance and repairs must be performed by qualified personnel. Do not attempt to open or repair the unit. If the power adapter is damaged, replace it with a new one of the same design immediately. Always refer to the safety instructions of any other devices connected to the reComputer.

Technical Data

• Power Input: 9 - 19 V/DC
• Power Adapter Input: 100 - 240 V/AC
• Power Adapter Output: 12 V/DC, 5 A (Barrel Jack 5.5/2.5 mm, Center Positive)
• Operating Temperature: 0 to +60 °C
• Operating Humidity: Max 95% RH (non-condensing)
• Dimensions: 130 x 120 x 50 mm
• Weight: 0.4 kg

Disposal

As an electronic device, this product must not be disposed of with unsorted municipal waste. Owners are legally required to dispose of it at designated collection points. Ensure all personal data is deleted before disposal. Distributors are obligated to provide free take-back options for waste electrical and electronic equipment.