Plumbing / Sinks Faucets
Signature Hardware Antonia 13.25-in 2-Light Vanity Light Installation Guide
Quick installation and maintenance guide for the Signature Hardware Antonia 13.25-in 2-Light Vanity Light. Includes wiring steps, mounting instructions, and safety precautions.
Table of contents
Quick guide from the manual
This document provides essential installation and safety instructions for the Antonia vanity light. Before beginning, ensure you have all necessary tools and that the power is completely shut off at the circuit breaker or fuse box. If you are unfamiliar with electrical installations, it is strongly recommended to consult a qualified electrician.
Safety information
- Always turn off electricity before starting installation.
- Do not hang the fixture by electrical wires.
- Do not install on ceilings with radiant heating systems.
- Follow all local plumbing and building codes.
Installation steps
- Thread the mounting screws (A) into the circular strap (B).
- Secure the circular strap (B) to the outlet box using the provided screws (C).
- Connect the fixture wires to the outlet box wires: white to white, black to black. Secure with wire connectors and electrical tape. Connect copper ground wires to the ground screw on the circular strap.
- Carefully tuck wires into the outlet box. Align the front plate (D) with the mounting screws (A) and secure it using the ball nuts (E).
- Place the glass shade (G) over the socket (F) and secure it using the socket ring (H) and wrench (I).
- Install the light bulb (not provided), ensuring you do not exceed the maximum wattage indicated on the socket.
Care and maintenance
To clean the fixture, wipe it with a soft cloth. Clean the glass components using a mild soap. Do not use abrasive materials, such as scouring pads, powders, steel wool, or abrasive paper, as these will damage the finish.
Contact information
For product or installation questions, contact Signature Hardware customer service at 1-800-221-3379 or visit their website at www.signaturehardware.com.
Official resources from the manual
Manufacturer information
Signature Hardware
Practical help
Common problems
Fixture does not light up after installation
Verify that the circuit breaker is on and that the light bulb is correctly installed and functional.
Uncertainty regarding grounding methods
Consult your local electrical code for approved grounding methods specific to your area.
Before use
- Ensure power is shut off at the fuse or circuit breaker.
- Gather required tools: wire strippers, wire cutters, Phillips screwdriver, flathead screwdriver, electrical tape, and a step ladder.
- Inspect the product for any shipping damage.
- Verify you have all components: mounting screws, circular strap, outlet box screws, front plate, ball nuts, glass, socket ring, and wrench.
Images and diagrams
- Figure 1 illustrates the wiring connection process and the mounting of the circular strap to the outlet box.
- Figure 2 shows the assembly of the glass shade onto the socket and the use of the socket ring.
Model compatibility
- Not for use on ceilings with radiant heating systems.
- Must be installed according to local electrical and building codes.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.