Installation Guide for Style Selections 10-Inch Bracket Corner Shelf

Quick guide from the manual

This guide provides instructions for the Style Selections 10-Inch Bracket Corner Shelf. The estimated assembly time is 15 minutes. For proper installation and safety, it is highly recommended to install the shelf into wall studs. Failure to do so will significantly affect the weight capacity and stability of the unit.

Important Safety Information:

• Maximum weight capacity: 15 lbs (6.8 kg).
• The unit must be attached securely to the wall.
• Do not attempt to assemble if parts are missing or damaged.

Tools Required (Not Included):

• Phillips screwdriver
• Level
• Variable speed drill with #2 Phillips bit
• Pencil
• 3/32 inch drill bit
• Stud finder (helpful tool)

Package Contents

Before beginning, ensure all parts are present:

• 1 x Shelf (A)
• 2 x Brackets (B)
• Hardware: Screws (AA), Anchors (BB), Dowel (CC), Cap (DD), Bracket (EE), Screw (FF)

Installation Overview

Follow these steps to install your shelf:

1. Positioning: Use a pencil to mark the desired location for the shelf on the wall.
2. Bracket Attachment: Secure the first bracket to the wall using the provided hardware.
3. Alignment: Use a level to ensure the second bracket is perfectly aligned with the first. Mark the position and secure it.
4. Securing: Ensure all brackets are firmly attached to the wall studs.
5. Final Assembly: Place the shelf onto the brackets and secure it according to the specific hardware configuration provided in the diagram.

Care and Maintenance

• Periodically check that all components are properly positioned, free from damage, and firmly connected.
• Use a soft, dry, clean cloth for dusting.
• Never use water to clean the furniture, as it may damage the finish.

Troubleshooting

If the shelf is tilting, the brackets are likely not installed at the same level. Use a quality level to ensure the mounting brackets are perfectly level.