Furniture / TV Stands
User Manual for Belleze Hazel 5 Tier Bookshelf
Get started with your Belleze Hazel 5 Tier Bookshelf. This guide covers assembly steps, safety warnings, weight limits, and maintenance tips to ensure long-lasting use.
Table of contents
Manual images
Click an image to enlargeQuick Guide
The Belleze Hazel 5 Tier Bookshelf is designed for home storage. Assembly requires two people and takes approximately 30 minutes. Please ensure you have all parts before beginning. The unit must be permanently fixed to a wall stud using the provided anti-tipping device to prevent accidents.
Package Contents
Before assembly, lay out all components on a flat, protected surface to prevent damage. Ensure you have the following:
- Storage Panels (5)
- Upper Leg Frames (2)
- Lower Leg Frames (2)
- Crossbars (2)
- Hardware: Various M6 screws (12x+1x, 1x, 20x+2x), nuts, leg levelers, wall anchors, anti-tipping straps, and tools (wrench/Allen key).
Assembly Instructions
Follow these steps to assemble your bookshelf:
- Crossbar Assembly: Connect the two crossbars (4) to form an 'X' shape using bolt (B) and nut (D).
- Leg Frame Assembly: Connect the upper leg frames (2) and lower leg frames (3) using bolts (A).
- Frame Connection: Attach the crossbar assembly to the back of the leg frames using bolts (A).
- Leg Levelers: Attach the leg levelers (E) to the bottom of the leg frames.
- Shelf Installation: Attach the storage panels (1) to the leg frames using bolts (C).
- Wall Mounting: Secure the unit to the wall using the anti-tipping device (F, G, H, I).
- Final Adjustment: Level the shelf on the ground by adjusting the leg levelers if necessary.
Safety and Warnings
Important: Serious or fatal crushing injuries may occur if the furniture tips over. You must permanently fix the unit to a wall stud. Do not climb, step on, or place overweighted objects on the product. The maximum load capacity is 60 lb per shelf. Keep small components, plastic bags, and packaging film away from children and pets to avoid choking or suffocation hazards.
Care and Maintenance
- Tightening: Tighten all bolts and screws again within the first 2 weeks of assembly. Check the tightness of all bolts every 2 months and tighten if necessary.
- Cleaning: Clean the surface of the MDF with a lightly dampened cloth. A small amount of mild soap can be used if necessary. Dry the surface immediately after cleaning.
- Restrictions: Do not use bleach or alcohol to clean the surface. Do not apply wood treatment to MDF parts. MDF will swell and distort if exposed to water.
Support
If you encounter difficulties or are missing parts, contact Belleze support at 1-800-682-6376 or email [email protected]. You can also register your product on the website for warranty benefits.
Manufacturer information
Belleze Furniture
Practical help
Common problems
Unstable or wobbling shelf
Adjust the leg levelers at the bottom of the frame until the unit sits flat on the floor.
Missing hardware or parts
Do not assemble the product. Contact Belleze support at 1-800-682-6376 or [email protected] for replacements.
Tipping hazard
The furniture must be permanently fixed to a wall stud using the included anti-tipping device.
Before use
- Verify all parts against the package contents list.
- Ensure you have 2 people available for assembly.
- Prepare a flat, soft surface (carpet or rug) to prevent scratches.
- Have a screwdriver, hammer, and drill ready (not included).
- Check that all bolts are tightened after assembly.
Specs in practice
- Maximum Load
- 60 lb per shelf. Do not exceed this weight limit.
- Assembly Time
- Approximately 30 minutes with 2 people.
Images and diagrams
- Crossbar assembly: Shows how to align and bolt the two crossbars into an 'X' shape.
- Leg frame assembly: Illustrates connecting the upper and lower frame sections.
- Anti-tipping installation: Details the process of marking, drilling, and securing the strap to the wall.
Model compatibility
- Requires a wall stud for the anti-tipping device installation.
- Different wall materials may require different types of wall anchors or screws.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.